- Edmonton Stock: 58
:
from
to
Clear
Clear
Raised double duplex receptacle cover · 4 in square · galvanized steel · Vista 8371-CRT
SKU: 8371
4 in square raised cover for mounting two duplex receptacles on a surface-mounted box. Made from hot-dipped galvanized steel with a 3/8 in (9.5 mm) raised device opening, commonly used where a double duplex layout is needed on a 4 in box.
Delivered to you by Sep 13 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This raised steel cover is used on a 4 in square electrical box to mount two duplex receptacles. It provides the correct device opening and a raised profile for surface-mounted wiring methods.
Use for
Use for 4 in (102 mm) square metal boxes where you need a double duplex receptacle layout. Suitable for commercial, industrial, and utility installations using a surface box and matching cover.
Avoid for
Avoid using this cover where a blank cover, single-device cover, weatherproof cover, or a different box size is required. Do not use it where the box, device spacing, or project specification calls for another raised depth or configuration.
Best for
Best for electricians needing a straightforward steel cover for two duplex devices on a standard 4 in square box. A typical buying check is confirming the box size, device layout, and raised depth before ordering.
Installed in
Commonly installed in surface-mounted branch circuit work, service rooms, workshops, utility areas, and commercial spaces where exposed raceway and steel boxes are used.
Why this product exists
This cover adapts a standard 4 in square box for two duplex receptacles while keeping the installation aligned with the box opening. The galvanized steel construction helps match common steel box systems used in Canadian electrical work.
Compared with similar products
Compared with a flat cover, this raised cover provides the formed device opening needed for receptacle mounting. Compared with single-device or toggle covers, it is configured specifically for two duplex receptacles. Compared with weatherproof covers, it is intended for standard indoor box-and-cover assemblies unless the full assembly is rated otherwise.
Specifications
- Product type: Raised double duplex receptacle cover plate
- Box compatibility: 4 in square box (approximately 102 mm)
- Configuration: Two duplex receptacles
- Raised depth: 3/8 in (approximately 9.5 mm)
- Material: Steel
- Finish: Hot-dipped galvanized steel
- Nominal dimensions: 4 in x 4 in (approximately 102 x 102 mm)
- Listed model reference found online: 8371-CRT
- Typical application: Surface-mounted device installation on steel box systems
- Similar or Equal ToBC8371
- Gang4" X 4"
- StyleDuplex
- Number of Devices2 Devices
- MaterialMetal Galvanized
- BrandWhite Label
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 198
- Edmonton Stock: 51
- Edmonton Stock: 60
- Edmonton Stock: 248
- Edmonton Stock: 30
