- Edmonton Stock: 58
:
from
to
Clear
Clear
Double Toggle Switch Cover · 4 in Square · Raised Galvanized Steel · Vista 8367-CRT
SKU: 8367
Raised 4 in square galvanized steel device cover for two toggle switches on a metal box. Commonly used to mount two toggle devices on a 4 in square box with a raised cover profile; verify the raise depth and box compatibility before ordering.
Delivered to you by Aug 13 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This raised steel cover is used to mount two toggle switches on a 4 in square metal electrical box. It provides the device openings and raised profile needed where the switches must sit proud of the box.
Use for
Use for 4 in square steel boxes in commercial, industrial, and utility installations where two toggle switches are required. Suitable for exposed or surface-mounted box assemblies when the cover style matches the box and device layout.
Avoid for
Avoid for decorator, duplex, GFCI, or mixed-device layouts. Do not use where a different raised depth, gang style, or non-matching box pattern is required.
Best for
Best for electricians replacing or roughing in standard 4 in square box covers for two toggle switches using a galvanized steel raised cover. A practical choice when you need a trade-standard metal cover rather than a decorative wall plate.
Installed in
Typically installed on 4 in square metal boxes, approximately 4 in x 4 in (102 mm x 102 mm), in service rooms, utility spaces, workshops, commercial interiors, and other exposed wiring applications.
Why this product exists
It converts a standard 4 in square box into a two-toggle device point while maintaining a metal box-and-cover assembly. This helps standardize box stock on site and supports common switch layouts using device covers instead of separate wall plates.
Compared with similar products
Compared with flat covers, a raised cover brings the device forward from the box. Compared with decorative wall plates, this is a box cover intended for metal box device mounting. Typical buying checkpoints are the box size, number of toggle openings, and raised depth such as 3/8 in (9.5 mm).
Specifications
- Product type: Raised device cover for two toggle switches
- Box size: 4 in square (102 mm square)
- Material: Galvanized steel
- Device openings: 2 toggle
- Raised depth: 3/8 in (9.5 mm)
- Application: Metal electrical boxes and covers
- Trade note: Commonly selected for exposed work and surface box assemblies; actual fit depends on box style and device arrangement.
- Similar or Equal ToBC8367
- Gang4" X 4"
- StyleToggle
- Number of Devices2 Devices
- MaterialMetal Galvanized
- BrandWhite Label
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 213
- Edmonton Stock: 13
- Edmonton Stock: 161
- Edmonton Stock: 1
- Edmonton Stock: 60
