- Stock Hydel BC Warehouse
Guy Strain Insulator · 4-1/4 in (108 mm) · Porcelain Wet-Process · Hydel 504WGS
Porcelain guy strain insulator for isolating sections of guy wire in pole line and utility support applications. Hydel 504WGS is a 4-1/4 in (108 mm) ANSI 54-2 wet-process unit commonly listed for 1/2 in guy strand, with dimensions that align to standard 504-pattern hardware.
What this product is for
The Hydel 504WGS is a porcelain guy strain insulator used to electrically isolate sections of guy wire on pole line and utility support installations. It is a standard 504-pattern wet-process strain insulator for overhead distribution and related outside plant work.
Use for
- Sectionalising guy wire on utility and distribution structures
- Replacing existing 504-pattern porcelain guy strain insulators
- Applications where a 4-1/4 in (108 mm) body and 1/2 in guy strand compatibility are required
Avoid for
- Applications requiring a larger 5/8 in strand insulator size
- Installations where a non-porcelain or polymer design is specifically specified
- Any application where utility standards, engineering drawings, or local requirements call for a different ANSI class or mechanical rating
Best for
Best for utility contractors, line crews, and maintenance buyers matching an existing ANSI 54-2 porcelain guy strain insulator in Canadian pole line work.
Installed in
Typically installed in overhead guy assemblies on distribution poles, service support structures, and related outdoor line hardware systems.
Why this product exists
Guy strain insulators are used to interrupt electrical continuity in guy wires while maintaining the mechanical connection of the guy assembly. This helps meet utility construction practice where isolation of the guy section is required.
Compared with similar products
Compared with smaller 502-pattern units, the 504WGS is the larger common size typically listed for 1/2 in strand. Compared with larger 506-pattern units, it suits applications that do not require the larger body size used for heavier strand. Always match the replacement to the specified pattern, strand size, and utility standard.
Specifications
- Manufacturer: Hydel
- Manufacturer part number: 504WGS
- Product type: Guy strain insulator
- Material: Porcelain, wet-process
- ANSI class: 54-2
- Nominal length: 4-1/4 in (108 mm)
- Nominal width: 2-7/8 in (73 mm)
- Typical application: 1/2 in guy strand
- Pattern reference: 504 style
- Installation environment: Outdoor overhead distribution and pole line hardware applications
Buying note: For replacement work, match the existing insulator pattern, strand size, and utility specification before ordering. Actual suitability depends on the guy assembly design, loading, and local utility standards.
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- 157 In Hydel BC Warehouse As Of Sep 14th 202697 – Loyalty Rewards
- Stock Hydel BC Warehouse
Guy Wire Guard · 2 m (6.6 ft) · Yellow Polyethylene Visibility Cover · Hydel 2YG
2YG
137 In Hydel BC Warehouse As Of Sep 14th 202629 – Loyalty Rewards- Stock Hydel BC Warehouse
Guy Hook For Wood Utility Poles Fits 5/8" To 3/4" Through Bolts Serrated Teeth · Hydel 34GH
34GH
40 In Hydel BC Warehouse As Of Sep 14th 202625 – Loyalty Rewards- Stock Hydel BC Warehouse
Anchor Rod · 6 ft x 5/8 in (1.8 m x 16 mm) · Double Thimble Eye · Hydel 658ADT
658ADT
80 In Hydel BC Warehouse As Of Sep 14th 2026147 – Loyalty Rewards- Stock Hydel BC Warehouse
Porclean Spool Insulator · Standard Size · 3 in x 3-1/8 in · Hydel 355WSPG
355WSPG
592 In Hydel BC Warehouse As Of Sep 14th 202611 – Loyalty Rewards









