- Edmonton Stock: 1
:
from
to
Clear
Clear
Magnetic wire snake · MagnePull wire fishing tool · rare earth magnetic roller and leader · Rack-A-Tiers 42800
SKU: 42800
Magnetic wire snake for fishing wire through finished or insulated walls using a rare earth magnetic roller and magnetic bullet leader. Includes a 6 ft (1.8 m) jack chain and is commonly used to guide wire with less wall damage than improvised pulling methods.
What this product is for
The Rack-A-Tiers MagnePull is a magnetic wire snake used to fish wire through finished walls, insulated cavities, and other concealed spaces where direct access is limited. It uses a rare earth magnetic roller on the outside surface and a magnetic leader inside the wall to help guide the pull path.
Use for
Use for pulling wire through drywall cavities, insulated walls, renovation work, retrofit installations, and other finished spaces where you want better control over the wire path. It is also commonly used when reducing the chance of scuffing or damaging wall surfaces matters.
Avoid for
Avoid using this as a substitute for standard fish tape or rods where a direct mechanical push is required through long conduit runs, blocked cavities, or heavily obstructed paths. It is not intended to confirm hidden hazards inside walls.
Best for
Best for electricians and low-voltage installers doing retrofit wire fishing in finished spaces. It is especially useful where insulation is present and where a magnetic guidance method can save time compared with repeated blind fishing attempts.
Installed in
Typically used in residential, commercial, and renovation environments including finished drywall walls, insulated partitions, and similar concealed wall spaces. This is a hand tool and is not permanently installed.
Why this product exists
This tool exists to make wire fishing faster and more controlled in finished walls. Compared with improvised methods, the smooth magnetic roller is designed to move along the wall surface while helping guide the internal leader to the target location.
Compared with similar products
Compared with standard fish tape alone, a magnetic wire snake can be easier to control in finished wall cavities where visibility is limited. Compared with basic magnetic pull tools, this kit is described by the manufacturer as using a strong rare earth magnetic roller with a smooth surface and a magnetic bullet leader. As typical trade guidance, magnetic guidance tools are most useful in accessible wall cavities; actual performance depends on wall construction, insulation, obstructions, and installation conditions.
Specifications
- Manufacturer part number: 42800
- Brand: Rack-A-Tiers
- Product family: MagnePull
- Product type: Magnetic wire snake / wire fishing tool
- Magnet type: Rare earth magnetic roller and magnetic bullet leader
- Included chain: 6 ft (1.8 m) jack chain
- Listed feature: Smooth roller surface to help avoid damaging walls
- Additional use: Can also be used as a stud finder
- Typical listed length reference from distributors: 10 in (254 mm) ball chain component reference
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 144
