- Stock Hydel BC Warehouse
Guy Wire Guard · 2 m (6.6 ft) · Yellow Polyethylene Visibility Cover · Hydel 2YG
2YG
29
– Loyalty Rewards
:
from
to
Clear
Clear
Guy End Grip · 5/16 in x 30 in (7.9 mm x 762 mm) · Galvanized Steel, 11,150 lb Rated · Hydel 3016GE
SKU: 3016GE
Uniformed guy end grip for 5/16 in guy wire applications, with a 30 in (762 mm) length and galvanized steel construction. Commonly used in overhead utility and pole line work where a preformed guy end is required; verify compatibility with the specified guy strand and utility standard before ordering.
What this product is for
The Hydel 3016GE is a uniformed guy end grip used in pole line and overhead distribution work to terminate or secure 5/16 in guy wire. It is manufactured from galvanized steel and is identified by Hydel as a 30 in (762 mm) long preformed guy end.
Use for
- Overhead utility and distribution guying applications
- 5/16 in (7.9 mm) guy wire systems where a preformed guy end is specified
- Replacement or new construction work requiring a galvanized steel guy end grip
- Projects where colour coding helps identify size in the field; this model is listed as black
Avoid for
- Guy wire sizes other than 5/16 in unless the utility or engineer specifically approves it
- Applications requiring stainless steel or non-galvanized hardware
- Installations where a different grip style, dead-end type, or utility-approved fitting is required
Best for
Best for contractors, utility crews, and technical buyers sourcing standard pole line hardware for overhead guying work in Canada. This item is a fit when the job calls for Hydel 3016GE specifically or an equivalent uniformed guy end with matching size and rating requirements.
Installed in
Typically installed in overhead distribution and pole line assemblies, including guyed pole structures and related support hardware systems. Final selection should follow the project drawing, utility standard, and approved assembly details.
Why this product exists
This guy end provides a preformed termination method for guying applications, helping crews match the specified wire size and hardware schedule. In utility work, using the correct grip size and rated hardware is critical for fit and load performance.
Compared with similar products
Compared with other Hydel guy ends, the 3016GE is the 5/16 in x 30 in model. Larger or smaller guy wire systems use different diameters, lengths, and colour codes. The published breaking strength for this model is 11,150 lb, so it should be selected only where that rating and the corresponding wire size match the design requirement.
Specifications
- Manufacturer: Hydel
- Manufacturer part number: 3016GE
- Product type: Uniformed guy end grip
- Diameter: 5/16 in (7.9 mm)
- Length: 30 in (762 mm)
- Material: Galvanized steel
- Colour code: Black
- Published strength: 11,150 lb
- Application: Pole line guy wire and accessory systems
- Country relevance: Commonly sold through Canadian electrical distribution channels
Selection guidance: match the guy end to the exact strand size, hardware schedule, and utility specification. Actual suitability depends on conductor type, installation method, loading, and local utility or engineering requirements.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
137 In Hydel BC Warehouse As Of Sep 14th 2026- Stock Hydel BC Warehouse
Square Anchor Plate · 16-1/4 x 16-1/4 in (413 x 413 mm) · Hot-Dip Galvanized 250 in² Area · Hydel 250SAP
250SAP
157 In Hydel BC Warehouse As Of Sep 14th 202697 – Loyalty Rewards- Stock Hydel BC Warehouse
Guy Hook For Wood Utility Poles Fits 5/8" To 3/4" Through Bolts Serrated Teeth · Hydel 34GH
34GH
40 In Hydel BC Warehouse As Of Sep 14th 202625 – Loyalty Rewards- Stock Hydel BC Warehouse
Anchor Rod · 6 ft x 5/8 in (1.8 m x 16 mm) · Double Thimble Eye · Hydel 658ADT
658ADT
80 In Hydel BC Warehouse As Of Sep 14th 2026147 – Loyalty RewardsGuy Strain Insulator · 4-1/4 in (108 mm) · Porcelain Wet-Process · Hydel 504WGS
504WGS
Call To Confirm Availablity24 – Loyalty Rewards
