- Stock Hydel BC Warehouse
Guy Wire Guard · 2 m (6.6 ft) · Yellow Polyethylene Visibility Cover · Hydel 2YG
2YG
29
– Loyalty Rewards
:
from
to
Clear
Clear
Square Anchor Plate · 16-1/4 x 16-1/4 in (413 x 413 mm) · Hot-Dip Galvanized 250 in² Area · Hydel 250SAP
SKU: 250SAP
Square anchor plate for pole line and utility anchoring applications, sized 16-1/4 x 16-1/4 in (413 x 413 mm) with 250 in² area and hot-dip galvanized finish. Fits 5/8 to 3/4 in anchor rod sizes and includes a welded nut retainer to assist anchor rod recovery.
What this product is for
The Hydel 250SAP is a square anchor plate used in pole line and utility anchoring systems where a buried plate anchor is required to provide holding strength for poles, guys, and related outside plant hardware.
Use for
Use for utility and electrical distribution installations that require a 250 in² square anchor plate with 5/8 to 3/4 in anchor rod compatibility. Commonly used in pole line work, guying applications, and other below-grade anchoring assemblies.
Avoid for
Avoid using this plate where a different anchor area, rod diameter, coating, or engineered holding value is required by the project design. Do not substitute for a larger anchor plate where soil conditions or loading call for higher holding capacity.
Best for
Best for contractors and utility crews needing a standard square anchor plate for outside plant work with corrosion resistance from a hot-dip galvanized finish and a welded nut retainer for easier rod recovery.
Installed in
Typically installed below grade as part of pole line anchoring systems in utility corridors, distribution projects, service infrastructure, and related outdoor electrical installations across Canada.
Why this product exists
This product provides a practical buried bearing surface for anchor systems, helping transfer load into surrounding soil. The square 16-1/4 x 16-1/4 in (413 x 413 mm) plate format provides 250 in² of anchor area, while the welded nut retainer helps with installation and anchor rod recovery.
Compared with similar products
Compared with smaller or non-galvanized anchor components, this model provides a standard 250 in² plate area with hot-dip galvanizing for outdoor service. Compared with larger 400 in² square anchors, it is typically selected where project loading and soil conditions do not require the larger plate size. Final anchor selection should follow project engineering, soil conditions, and utility standards.
Specifications
- Manufacturer: Hydel
- Manufacturer part number: 250SAP
- Product type: Square anchor plate
- Product class: Pole Line Hardware
- Dimensions: 16-1/4 x 16-1/4 in (413 x 413 mm)
- Anchor area: 250 in²
- Compatible anchor rod diameter: 5/8 to 3/4 in
- Finish: Hot-dip galvanized
- Construction detail: Welded nut retainer on bottom plate
- Standard package: 1
- Approximate weight: 11 lb each (based on 1100 lb per 100 units catalogue listing)
Typical guidance only: anchor performance depends on soil class, installation method, depth, and project loading. Actual performance depends on installation conditions, soil characteristics, layout, and local utility or engineering requirements.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
137 In Hydel BC Warehouse As Of Sep 14th 2026- Stock Hydel BC Warehouse
Anchor Rod · 6 ft x 5/8 in (1.8 m x 16 mm) · Double Thimble Eye · Hydel 658ADT
658ADT
80 In Hydel BC Warehouse As Of Sep 14th 2026147 – Loyalty RewardsGuy Strain Insulator · 4-1/4 in (108 mm) · Porcelain Wet-Process · Hydel 504WGS
504WGS
Call To Confirm Availablity24 – Loyalty Rewards- Stock Hydel BC Warehouse
Guy Hook For Wood Utility Poles Fits 5/8" To 3/4" Through Bolts Serrated Teeth · Hydel 34GH
34GH
40 In Hydel BC Warehouse As Of Sep 14th 202625 – Loyalty Rewards- Stock Hydel BC Warehouse
Guy End Grip · 5/16 in x 30 in (7.9 mm x 762 mm) · Galvanized Steel, 11,150 lb Rated · Hydel 3016GE
3016GE
222 In Hydel BC Warehouse As Of Sep 14th 202612 – Loyalty Rewards
