- Stock Hydel BC Warehouse
Screw Insulator With Bracket · 3-1/4 in Screw Length · 1/4 in Stainless Steel Cotter Pin Included · Hydel 13712DSS
3 Inch Insulated screw bracket for pole line and utility distribution hardware, used with screw insulator bracket applications. Features a 3-1/4 in screw length, 3-5/8 in washer width, 1 in hole size, 80 lb load capacity, and includes a 1/4 in stainless steel cotter pin.
What this product is for
This insulated screw bracket is used in pole line hardware assemblies for utility and distribution applications. It is commonly selected where a screw-type insulator bracket is required on wood pole installations.
Use for
Use for overhead distribution hardware, screw insulator mounting, and replacement or maintenance work on existing pole line assemblies. Suitable where the specified bracket dimensions and cotter pin arrangement must match the existing installation.
Avoid for
Avoid using this bracket where a different bracket geometry, higher load requirement, or alternate insulator style is specified. Do not substitute without confirming utility standard drawings, project requirements, and local engineering approval.
Best for
Best for utility contractors, line crews, and maintenance buyers needing a Hydel insulated screw bracket with standard 3-1/4 in dimensions and included stainless steel cotter pin.
Installed in
Typically installed on utility poles and overhead distribution structures as part of pole line hardware systems.
Why this product exists
This bracket provides a standard mounting component for screw insulator applications, helping crews match specified pole line hardware during new construction, repair, or replacement work.
Compared with similar products
Compared with other screw brackets, this model is identified by its 3-1/4 in (approximately 83 mm) screw length, 3-5/8 in (approximately 92 mm) washer width, 1 in (approximately 25 mm) hole size, and included 1/4 in stainless steel cotter pin. Buyers should match these dimensions to the required utility standard before ordering.
Specifications
- Brand: Hydel
- Manufacturer part number: 13712DSS
- Product type: Insulated screw bracket
- Product class: Pole Line Hardware
- Screw length: 3-1/4 in (approximately 83 mm)
- Washer width: 3-5/8 in (approximately 92 mm)
- Hole size: 1 in (approximately 25 mm)
- Load capacity: 80 lb
- Included: 1/4 in stainless steel cotter pin
- Standard pack: 25
- UPC: 620757080096
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- 222 In Hydel BC Warehouse As Of Sep 14th 202612 – Loyalty Rewards
- Edmonton Stock: 19
- Edmonton Stock: 53
- Stock Hydel BC Warehouse
Guy Wire Guard · 2 m (6.6 ft) · Yellow Polyethylene Visibility Cover · Hydel 2YG
2YG
137 In Hydel BC Warehouse As Of Sep 14th 202629 – Loyalty Rewards










