- Edmonton Stock: 50
:
from
to
Clear
Clear
Teck Connector · 1/2 Inch Teck Connector 0.72 to 0.99 in OD Cable · IP66 Rated · Techspan TSTK050-2
SKU: TSTK050-2
Techspan TSTK050-2 is a 1/2 in NPT teck connector for armoured cable with a 0.72 to 0.99 in cable OD range and IP66 sealing. Use it to terminate TECK-style cable where a weather-resistant aluminium connector and proper cable fit are required.
What this product is for
This 1/2 in NPT teck connector is used to terminate and secure armoured cable into boxes, enclosures, and equipment while maintaining an IP66 seal when installed correctly. It is intended for TECK-style cable applications in commercial and industrial work.
Use for
Use for TECK90, MC-HL, MCC, or similar armoured cable where the cable outer diameter is approximately 0.72 to 0.99 in (18.3 to 25.1 mm) and a 1/2 in NPT entry is required. Suitable for indoor or outdoor installations where a weather-resistant cable entry is needed.
Avoid for
Avoid using this connector when the cable outer diameter falls outside the listed range, when a different hub size is required, or when the cable type is not compatible with teck-style fittings. Do not size from conductor count alone; match the actual cable OD.
Best for
Best for electricians and contractors terminating armoured cable into panels, junction boxes, disconnects, and outdoor enclosures where cable fit and ingress protection matter.
Installed in
Commonly installed in industrial facilities, commercial buildings, service equipment, control panels, and exterior equipment enclosures across Canada.
Why this product exists
This fitting provides mechanical retention, grounding continuity through the armour connection, and environmental sealing at the cable entry. A wider cable range can reduce SKU count on service vehicles and in stock rooms.
Compared with similar products
Compared with narrower-range teck fittings, this connector covers a broader cable OD range. The legacy cross reference provided for this SKU aligns with common equivalents such as ST050-465 and ST050-466, but cross references are suggested only and actual cable diameter should be confirmed before ordering.
Specifications
- Brand: Techspan
- MPN: TSTK050-2
- Product type: Teck connector
- Hub size: 1/2 in NPT (12.7 mm)
- Cable outer diameter range: 0.72 to 0.99 in (18.3 to 25.1 mm)
- Ingress protection: IP66
- Material: Aluminium
- Cable types referenced by Techspan teck connector literature: TECK90, MC-HL, MCC, ACWU90 depending on series
- Buying note: Always verify the actual cable outer diameter and armour size before selection. Cross references are typical guidance only and may vary by cable manufacturer.
- TypeWet Teck Connector
- Trade Size1/2"
- ApplicationWet
- Outer Jacket Range0.72 to 0.99
- Equal ToST050-465 (0.725 - 0.885) | ST050-466 (0.825 - 0.985)
- BrandTechspan
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 102
