- Edmonton Stock: 3
Spa Panel Kit · 60A 2-Pole GFCI Included · 125A Main Lug Outdoor 4/8 Circuit · Siemens W0408ML1125-60
What this product is for
This Siemens spa panel kit is used to provide local GFCI protection and disconnecting means for outdoor hot tub and spa installations. It combines a 125A main lug outdoor loadcentre with an included 60A 2-pole GFCI breaker in one enclosure.
Use for
Use for 120/240V single-phase, 3-wire spa and hot tub circuits where a 60A GFCI-protected feeder or branch circuit package is required. Commonly used where you need an outdoor-rated spa pack with a few extra circuit positions for related equipment or future expansion.
Avoid for
Avoid using this panel where indoor-only enclosures are required, where service entrance equipment is needed, or where project specifications call for a different ampacity, enclosure type, or breaker series. Do not assume suitability for every spa installation without checking the equipment nameplate and local electrical code.
Best for
Best for residential hot tub and spa installations needing a compact outdoor panel with factory-matched 60A GFCI protection. Also useful when electricians want a Siemens loadcentre format with 4 spaces and up to 8 circuits.
Installed in
Typically installed outdoors near spas, hot tubs, or pool-related equipment in accordance with clearance and bonding requirements. Enclosure dimensions are approximately 6 in W x 12-1/4 in H x 4-1/4 in D (152 x 311 x 108 mm).
Why this product exists
This spa pack simplifies hot tub panel selection by bundling the outdoor loadcentre and 60A 2-pole GFCI breaker together. That helps reduce part matching issues and speeds up ordering for standard spa applications.
Compared with similar products
Compared with a basic outdoor disconnect, this spa panel adds integrated loadcentre capacity and included GFCI protection. Compared with larger subpanels, this format is more compact for dedicated spa installations. As typical guidance only, a 60A spa pack is commonly selected for larger hot tub loads, but actual equipment requirements depend on the manufacturer nameplate, conductor sizing, installation conditions, and local electrical code.
Specifications
- Brand: Siemens
- Manufacturer part number: W0408ML1125-60
- Product type: Spa panel loadcentre kit / spa pack
- Included breaker: 60A 2-pole GFCI
- Main lug rating: 125A
- Spaces/Circuits: 4 spaces / 8 circuits
- Voltage: 120/240 VAC
- Phase: 1-phase
- Wiring: 3-wire
- Enclosure rating: NEMA 3R outdoor
- Interrupt rating: 10 kA
- Mounting: Flush or surface, depending on installation
- Construction: Steel enclosure with aluminium bus
- Certifications: UL listed, CSA certified/listed by seller sources
- Approximate dimensions: 6 in x 12-1/4 in x 4-1/4 in (152 x 311 x 108 mm)
- Typical application: Outdoor spa and hot tub installations
Actual suitability depends on spa load, feeder design, bonding, disconnect location, and local code requirements.
- BrandSiemens Breakers
- Warranty5 year
- Electrical
- Poles2 Pole
- Amps60A
- Physical
- MountingBolt On
- Breaker TypeGround Fault
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Spa Panel Package · 50A 2-Pole GFCI Included · 125A Main Lug Outdoor 4/8 Circuit · Siemens W0408ML1125-50
W0408ML1125-50
Available to Order | Typically Arrives in 1 - 3 Weeks Ships From Western Canada Warehouse386 – Loyalty Rewards- Edmonton Stock: 22
- Edmonton Stock: 52
Plug-In Circuit Breaker · 15A 1-Pole 120/240V · 10 kAIC Type QP · Siemens Q115
Q115
12 – Loyalty Rewards











