Enclosed Circuit Breaker · 600A, 3-Pole 4-Wire, 600V AC, 100kA@480V, NEMA 1 Indoor · 100% Neutral Protection · Noark Electrical E01-4BM4H600T3L
What this product is for
This enclosed circuit breaker assembly is used for overcurrent protection and disconnecting in commercial and industrial power distribution systems where a factory-assembled 600A breaker in an indoor enclosure is required. It combines a Noark Ex9M4 series MCCB with a NEMA 1 steel enclosure for indoor service.
Use for
Use for feeder protection, service disconnects, distribution sections, equipment isolation, and other high-current indoor applications requiring a 3-pole, 4-wire assembly with neutral terminal provision. Commonly used where available fault current is high and a 100kA at 480V interrupting rating is needed.
Avoid for
Avoid using this enclosure outdoors, in washdown areas, or in dusty or corrosive locations where a NEMA 3R or NEMA 12 enclosure would be more appropriate. Do not select it where project requirements call for a different SCCR, enclosure type, or electronic trip functionality.
Best for
Best for electricians, panel builders, and maintenance teams needing a pre-assembled enclosed breaker that reduces field assembly time and helps standardize installations in indoor commercial and industrial facilities.
Installed in
Typically installed in electrical rooms, service areas, mechanical rooms, manufacturing facilities, and commercial buildings. The internal MCCB is approximately 12.3 in x 7.7 in x 5.4 in (313 x 195 x 138 mm); allow additional wall and working clearance based on the enclosure dimensions and local code requirements.
Why this product exists
This product provides a ready-to-install enclosed breaker solution for higher-current systems, combining breaker protection, enclosure, and 4-wire neutral provision in one assembly. It is intended to simplify procurement and installation compared with sourcing the breaker and enclosure separately.
Compared with similar products
Compared with 3-wire enclosed breakers, this 3-pole 4-wire version includes neutral provision for systems that require it. Compared with lower-interrupting models in the same family, the M4H configuration is selected where higher available fault current makes a 100kA at 480V rating necessary. As typical guidance, higher interrupting ratings are commonly chosen for larger service and feeder locations, but final selection must match the available fault current study and local electrical code.
Actual suitability depends on system voltage, available fault current, conductor terminations, enclosure environment, and installation conditions.
Specifications
- Brand: Noark Electrical
- Manufacturer part number: E01-4BM4H600T3L
- Product family: Ex9M4E enclosed breaker / Ex9M4 series MCCB assembly
- Product type: Fully assembled enclosed moulded case circuit breaker
- Current rating: 600A
- Poles: 3-pole
- System configuration: 4-wire
- Neutral: 100% neutral protection / neutral terminal provision
- Voltage rating: 600V AC
- Interrupting capacity: 100kA at 480V AC
- Interrupting capacity: 50kA at 600V AC
- Interrupting capacity: 150kA at 240V AC
- Enclosure type: NEMA 1 indoor
- Breaker type: Thermal-magnetic, adjustable trip
- Thermal setting: adjustable 0.8 to 1.0 x In (480A to 600A)
- Magnetic setting: adjustable 5 to 10 x In (3000A to 6000A)
- Connections: Lug line/load side
- Conductor range: #3/0 AWG to 400 kcmil (approximately 95 to 185 mm²)
- Standards: UL 489, CSA C22.2 No. 5, IEC/EN 60947-2
- Application: Indoor commercial and industrial distribution
- BrandNoark Electrical
- Warranty5 year
- Electrical
- Poles3 Pole
- Amps600 A
- Voltage600 V
- Interrupt Rating (AIC)50 kA
- Physical
- Enclosure DimensionsH49.2" x W22" x D7"
- Breaker TypeMoulded Case Circuit Breakers (MCCB)
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.