17 Lumens LED Contemporary Surface-Mount Step Light 12V 3000K Centennial Brass | Kichler 16172CBR30
Kichler 12V integrated LED contemporary surface-mount step light in Centennial Brass with 3000K output and approximately 17 lumens. Designed for deck, patio and step lighting where a low-profile fixture is needed without a junction box.
What this product is for
This low voltage 12V integrated LED step light is used to add soft illumination to steps, deck edges, patios and similar landscape features. It is a contemporary surface-mount design in Centennial Brass with a 3000K light colour and approximately 17 lumens of output.
Use for
Use for step risers, deck skirting, retaining walls and patio transitions where a compact fixture and low glare light level are preferred. It is suited to landscape lighting systems operating from 9-15V, typical of 12V outdoor lighting installations.
Avoid for
Avoid using this fixture where higher output area lighting is required, or where a line-voltage fixture is needed. This is not the right choice when you need a replaceable lamp landscape fixture rather than an integrated LED design.
Best for
Best for contractors and homeowners matching Kichler Centennial Brass landscape systems and looking for a low-profile step light that mounts without a junction box. The 3000K colour temperature is commonly used for warm architectural and residential outdoor lighting.
Installed in
Typically installed on vertical step faces, deck structures and hardscape features in outdoor low voltage lighting systems. The fixture measures about 6 in L x 0.75 in W x 3 in H (152 x 19 x 76 mm).
Why this product exists
This product provides discreet step and accent lighting in locations where a recessed fixture or backbox is not practical. Surface mounting helps simplify retrofit and new installation layouts while keeping the fixture profile compact.
Compared with similar products
Compared with larger hardscape or path fixtures, this model is intended for close-range step illumination rather than broad area lighting. Integrated LED construction reduces lamp replacement, but unlike replaceable lamp landscape fixtures, the light source is not field-swapped. Typical low voltage landscape design also aims to keep voltage drop to 10 percent or less; actual performance depends on cable length, wire size, transformer loading and site conditions.
Specifications
- Brand: Kichler
- MPN: 16172CBR30
- Product type: Contemporary surface-mount step light
- Application: Landscape lighting, deck and patio
- Lamp type: Integrated LED
- System voltage: 12V low voltage
- Operating range: 9-15V
- Light output: approximately 17 lumens
- Colour temperature: 3000K
- Power: 0.82W
- Apparent power: 1.45VA
- Finish: Centennial Brass
- Mounting: Surface mount, no junction box
- Dimensions: 6 in L x 0.75 in W x 3 in H (152 x 19 x 76 mm)
- Fixture surge protection: 2000V
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.