In-Ground Well Light · 12V PAR36 · Enclosed Architectural Bronze Housing · Kichler 15194AZ
What this product is for
This enclosed in-ground well light is used in 12V low-voltage landscape lighting systems where the fixture needs to sit flush in grade and direct light upward. It is built for one PAR36 lamp and is suited to accenting trees, columns, stonework, signage, and other exterior features.
Use for
Use for landscape uplighting, façade lighting, feature lighting, and other outdoor applications where a recessed in-ground fixture is preferred. It is commonly selected when contractors want a sealed well light in an architectural bronze finish for coordinated landscape installations.
Avoid for
Avoid using this fixture where an integrated LED fixture is specifically required, or where lamp replacement access is impractical for the site. It is also not the right choice if you need a complete fixture with built-in lumen output already specified, since light performance depends on the PAR36 lamp installed.
Best for
Best for low-voltage landscape systems that need a traditional PAR36 well light with field-selectable lamp choice. For buying decisions, a replaceable-lamp fixture can reduce long-term maintenance cost because the lamp can be changed without replacing the full fixture.
Installed in
Typically installed in landscaped beds, gravel areas, or other outdoor grade-level locations around homes, commercial properties, entrances, and feature areas. Fixture size is approximately 8.25 in H x 7 in dia. (210 mm H x 178 mm dia.), which helps when planning sleeve, excavation, and finish grade clearance.
Why this product exists
This product exists for installers who need a recessed uplight that protects the lamp below grade while delivering focused accent lighting from a 12V system. It provides a sealed well-light format instead of a surface-mounted spot or flood fixture.
Compared with similar products
Compared with integrated LED in-ground fixtures, this model gives more flexibility because the PAR36 lamp can be selected or replaced to suit the application. Compared with exposed accent lights, an in-ground well light offers a lower visual profile. As typical guidance, smaller lamp outputs are commonly used for tighter accents, while higher-output PAR36 lamps are often chosen for taller trees or stronger façade effects. Actual performance depends on beam spread, aiming, lamp choice, surrounding surfaces, and local electrical code.
Specifications
- Brand: Kichler
- Manufacturer part number: 15194AZ
- Product type: In-ground well light / enclosed uplight
- System voltage: 12V low voltage; operating range 9-15V
- Lamp type: PAR36
- Maximum lamp wattage: 50W
- Lamp quantity: 1
- Finish: Architectural Bronze
- Fixture dimensions: 8.25 in H x 7 in dia. (210 mm H x 178 mm dia.)
- Approximate length: 8 in. (203 mm)
- Wire length: 34 in. (864 mm)
- Material: Polymeric housing with glass lens
- Lens: Heat-resistant glass, sealed for watertight outdoor use
- Application: Outdoor landscape lighting
- Compatible accessory: Rock Guard / Glare Shield 15694AZ
- Bulb included: Verify by listing; manufacturer page indicates lamp type and voltage, while distributor listings may vary on lamp inclusion
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.