Slipfitter Mount · Type A · Adjustable Pole Mount for Area/Flood Fixtures · Nexleds TYPE A SLIPFITTER
What this product is for
This Type A slipfitter is a mounting accessory used to install compatible Nexleds area lights and flood lights on a pole-mounted tenon or round-pole style adapter, while allowing the fixture angle to be adjusted during installation.
Use for
- Area light and flood light mounting where fixture tilt is needed
- Parking lots, yards, laneways, industrial sites, and perimeter lighting
- Retrofit or replacement jobs where a bronze outdoor finish is preferred
Avoid for
- Fixtures not listed as compatible with Nexleds Type A slipfitter mounting
- Wall-mount applications that require a wall bracket instead of a pole fitter
- Installations where the pole or tenon size has not been confirmed
Best for
Electricians and lighting contractors who need a simple adjustable mount for outdoor area or flood fixtures on standard pole-top or tenon-style applications. This style is commonly used when final aiming needs to be set on site to improve coverage and reduce spill light.
Installed in
Typically installed on outdoor lighting poles in commercial, industrial, municipal, and site-lighting applications. Common tenon sizes in this class are around 2-3/8 in OD (approximately 60 mm), but actual compatibility depends on the fixture and mount design.
Why this product exists
Slipfitters are used when a fixed arm or straight mount does not provide the aiming flexibility needed for area or flood lighting. They help align the fixture during commissioning so light can be directed where it is needed most.
Compared with similar products
Compared with a fixed straight-arm or wall mount, a slipfitter gives adjustable aiming for pole-mounted fixtures. Compared with an integral mount supplied on some luminaires, this accessory is useful when the compatible fixture is ordered without the required pole-mount hardware or when a replacement mount is needed.
Specifications
- Product type: Slipfitter mounting accessory
- Mount style: Type A
- Application: Compatible Nexleds area light and flood light fixtures
- Adjustment: Field-adjustable aiming/tilt
- Finish: Bronze
- Installation: Pole/tenon-style outdoor mounting
- Use location: Outdoor lighting applications
- Buying note: Confirm fixture compatibility and pole or tenon dimensions before ordering
Typical guidance only: many outdoor slipfitter mounts in this category are used on approximately 2-3/8 in (60 mm) OD tenons, but the exact fit for this item should be confirmed from the fixture or manufacturer documentation. Actual compatibility depends on fixture design and installation conditions.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.