800 Lumens 9.5W Watts A19 Frosted LED 2700K Medium Base (4/Pack) Satco Lighting S39596
What this product is for
This 800 lumen A19 LED lamp is used for general indoor lighting in residential and light commercial fixtures. It provides warm 2700K light, operates on 120V, and fits standard medium E26 lamp holders.
Use for
Use for table lamps, floor lamps, ceiling lights, wall fixtures, and other standard A19 applications where a non-dimmable 120V lamp is specified. It is commonly selected as a replacement for approximately 60W incandescent lamps while reducing wattage to 9.5W.
Avoid for
Avoid using this lamp on dimmers, in circuits requiring dimming control, or where a different lamp shape, higher CRI, or different colour temperature is needed. Confirm fixture compatibility before use in fully enclosed or specialty luminaires.
Best for
Best for electricians and maintenance buyers needing a standard warm white A19 lamp in a convenient 4-pack for service stock, residential turnover, and routine lamp replacement.
Installed in
Installed in medium-base fixtures with E26 sockets. Typical lamp size is 4.33 in overall length x 2.36 in diameter (approximately 110 x 60 mm), which suits most standard A19 fixtures.
Why this product exists
This lamp provides the familiar light distribution and form factor of a traditional A19 incandescent while lowering energy use and extending service life. With a rated life of 15,000 hours, it helps reduce relamping frequency in everyday applications.
Compared with similar products
Compared with dimmable A19 LED lamps, this non-dimmable version is intended for straightforward on-off switching. Compared with higher colour temperature lamps such as 4000K or 5000K, the 2700K output is better suited to residential and hospitality-style spaces. As typical guidance, 800 lumens is commonly used where a 60W incandescent lamp was previously installed; actual light levels depend on fixture design and room finishes.
Specifications
- Manufacturer part number: S39596
- Brand: Satco
- Lamp type: LED A19
- Pack size: 4-pack
- Lumen output: 800 lm
- Wattage: 9.5 W
- Voltage: 120V
- Colour temperature: 2700K warm white
- Base: Medium E26
- Dimming: Non-dimmable
- Finish: Frosted
- Beam angle: 220°
- CRI: 80+
- Rated life: 15,000 hours
- Incandescent equivalent: 60W
- Location rating: Damp location
- Enclosed fixture rated: Yes
- Operating temperature: -25°C to +45°C (-13°F to +113°F)
- Dimensions: 4.33 in MOL x 2.36 in MOD (approximately 110 mm x 60 mm)
- Warranty: 2-year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.