800 Lumens 9.5W Watts A19 Frosted LED 4000K Medium Base (4/Pack) Satco Lighting S29558
What this product is for
This A19 LED lamp is used for general indoor lighting in residential, commercial and light-duty institutional fixtures that take a standard E26 medium base. It provides 800 lumens of 4000K cool white light with a wide 220° beam spread, making it suitable for open fixtures, ceiling lights, table lamps and similar general-service applications.
Use for
Use for kitchens, laundry areas, corridors, utility rooms, offices and other spaces where a neutral-to-cool white lamp is preferred. Commonly used as an approximately 60W incandescent replacement while drawing only 9.5W. It is rated for enclosed fixtures and damp locations when installed in compatible fixtures.
Avoid for
Avoid using this lamp on dimmers, as it is non-dimmable. Avoid applications requiring colour tuning, smart controls built into the lamp, or outdoor exposure without a suitable damp-rated enclosed fixture.
Best for
Best for buyers who need a straightforward 120V A19 replacement lamp in a 4-pack for maintenance stock, tenant turnover, office relamping or everyday fixture replacement. The 4000K colour temperature is typically chosen where a cleaner, cooler appearance is preferred over warm residential light.
Installed in
Installed in standard medium-base sockets (E26) in fixtures sized for A19 lamps. Lamp size is approximately 4.33 in overall length x 2.36 in diameter (110 x 60 mm), so confirm clearance in tight shades or decorative fixtures before ordering.
Why this product exists
This lamp provides a familiar A19 form factor with lower energy use and longer service life than incandescent lamps. With a rated life of 15,000 hours, it helps reduce relamping frequency in everyday applications.
Compared with similar products
Compared with dimmable A19 LEDs, this model is intended for simple on/off switching. Compared with 2700K or 3000K lamps, the 4000K output appears cooler and is commonly selected for task-oriented or commercial spaces. As a rule of thumb, 4000K lamps are often chosen where visual clarity matters more than a warm ambient feel. Actual lighting preference depends on fixture design, room finishes and application.
Specifications
- Manufacturer part number: S29558
- Brand: Satco Lighting
- Lamp type: LED A19
- Pack size: 4-pack
- Wattage: 9.5W
- Voltage: 120V
- Light output: 800 lm
- Colour temperature: 4000K cool white
- CRI: 80+
- Base: E26 medium base
- Finish: Frosted
- Beam angle: 220°
- Dimming: Non-dimmable
- Incandescent equivalent: 60W
- Rated life: 15,000 hours
- Operating temperature: -13°F to +113°F (-25°C to +45°C)
- Location rating: Damp
- Enclosed fixture rated: Yes
- Safety listing: cULus
- Warranty: 2 years
- Dimensions: 4.33 in MOL x 2.36 in MOD (110 x 60 mm)
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.