MLE96-24DC-UD AXITE LIGHTING 96W 24V DIMMABLE 5 IN 1 LED DRIVER
What this product is for
This 96W constant-voltage LED driver converts 100-277V AC input power to 24V DC output for compatible low-voltage LED lighting systems. It is intended for LED strip lighting, linear lighting, accent lighting, and other 24V DC fixtures that require a Class 2 dimmable power supply.
Use for
- 24V DC LED strip and tape light installations
- Under-cabinet, cove, display, and architectural lighting
- Projects requiring 5-in-1 dimming compatibility including TRIAC, ELV, and 0-10V control
- Installations using 100-277V AC branch power
Avoid for
- Constant-current LED fixtures
- Loads requiring output above 24V DC or above 4A
- Applications where the connected LED load exceeds 96W
- Systems requiring a different enclosure or environmental rating than specified by the manufacturer
Best for
Best for electricians and lighting contractors specifying a 24V DC dimmable driver for strip lighting where broad dimmer compatibility and universal 100-277V AC input are important. It also suits retrofit work where existing dimming methods may vary by site.
Installed in
Commonly installed in millwork lighting, retail displays, hospitality lighting, coves, soffits, and other low-voltage LED applications. The housing dimensions are approximately 7.73 in x 1.54 in x 5.16 in (196 x 39 x 131 mm), which helps when planning enclosure or remote mounting space.
Why this product exists
This driver is designed to power 24V DC LED loads from standard line voltage while allowing multiple common dimming methods on one platform. For strip lighting layouts, a typical rule of thumb is to size the driver with headroom rather than loading it to the full 96W nameplate. Actual performance depends on installation conditions, wire length, voltage drop, layout, and local electrical code.
Compared with similar products
Compared with non-dimmable 24V drivers, this model adds multi-protocol dimming flexibility. Compared with lower wattage 24V drivers, the 96W rating can support longer runs or higher-density tape light, provided the total connected load stays within the manufacturer's limits. With a maximum 4A output, it is suited to many Class 2 low-voltage lighting applications.
Specifications
- Type: Constant-voltage LED driver
- Input voltage: 100-277V AC, 50/60 Hz
- Output voltage: 24V DC
- Maximum output power: 96W
- Maximum output current: 4A
- Dimming: 5-in-1, including TRIAC, ELV, and 0-10V sink/source; additional 5-in-1 protocols referenced by distributor/manufacturer listings
- Class: Class 2
- Certifications: UL, CSA
- Enclosure: Black powder-coated steel enclosure
- Dimensions: 7.73 in x 1.54 in x 5.16 in (196 x 39 x 131 mm)
- Watts96W
- FinishBlack
- Mounting TypePost or Wall Mount
- Volts24V DC
- TypeElectronic
- LocationOutdoor
- Height5.16"
- Width7.73"
- Depth1.54"
- BrandAxite Lighting Canada
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Available For Backorder321 – Loyalty Rewards
MLE300-24DC-UD AXITE LIGHTING 300W 24V DIMMABLE 5 IN 1 LED DRIVER
MLE300-24DC-UD
Available For Backorder521 – Loyalty RewardsMLE200-24DC-UD AXITE LIGHTING 200W 24V DIMMABLE 5 IN 1 LED DRIVER
MLE200-24DC-UD
Available For Backorder400 – Loyalty RewardsMLE150-24DC-UD AXITE LIGHTING 150W 24V DIMMABLE 5 IN 1 LED DRIVER
MLE150-24DC-UD
Available For Backorder361 – Loyalty RewardsMLE30-24DC-UD AXITE LIGHTING 30W 24V DIMMABLE 5 IN 1 LED DRIVER
MLE30-24DC-UD
Available For Backorder146 – Loyalty RewardsMLE60-24DC-UD AXITE LIGHTING 60W 24V DIMMABLE 5 IN 1 LED DRIVER
MLE60-24DC-UD
Available For Backorder172 – Loyalty RewardsMLE80-24DC-UD AXITE LIGHTING 80W 24V DIMMABLE 5 IN 1 LED DRIVER
MLE80-24DC-UD
Available For Backorder265 – Loyalty RewardsMLE500-24DC-UD AXITE LIGHTING 500W 24V DIMMABLE 5 IN 1 LED DRIVER
MLE500-24DC-UD
Available For Backorder714 – Loyalty Rewards- Edmonton Stock: 131
- Edmonton Stock: 46
- Edmonton Stock: 301









