- Edmonton Stock: 90
MLE60-12DC-UD AXITE LIGHTING 60W 12V DIMMABLE 5 IN 1 LED DRIVER
What this product is for
This 60W LED driver converts 100-277V AC input power to 12V DC constant-voltage output for compatible LED strip lights and other 12V DC lighting loads. It is intended for applications that need dimming control and a Class 2 low-voltage power supply.
Use for
- 12V DC LED strip and tape light systems
- Under-cabinet, cove, display, and accent lighting
- Projects requiring a dimmable constant-voltage driver
- Residential and light commercial indoor installations
Avoid for
- Constant-current LED fixtures that require a mA-rated driver
- 24V DC LED loads
- Loads exceeding 60W total connected wattage
- Applications where dimmer compatibility has not been confirmed
Best for
Best for electricians and lighting installers specifying 12V DC dimmable power for LED strip runs, millwork lighting, and architectural accent lighting where universal dimming flexibility is required.
Installed in
Typically installed in indoor cabinets, millwork, display areas, soffits, and serviceable low-voltage lighting locations. The housing dimensions are approximately 6.79 x 4.47 x 1.38 in (172 x 114 x 35 mm), which helps when planning enclosure or remote-mount space.
Why this product exists
Many 12V LED lighting systems need a constant-voltage driver that can work across common dimming control types while accepting a wide 100-277V AC input range. This model is built to simplify specification where dimming flexibility and Class 2 output are important.
Compared with similar products
Compared with non-dimming drivers, this unit is intended for installations where light level control is required. Compared with 24V drivers, it is matched to 12V DC systems and should only be used with compatible 12V loads. As a rule of thumb, keeping the connected load below the full 60W rating can help allow for startup conditions and long-term reliability. Actual performance depends on installation conditions, dimmer selection, wiring layout, and local electrical code.
Specifications
- Manufacturer part number: MLE60-12DC-UD
- Brand: Axite Lighting Canada
- Product type: Electronic LED driver / power supply
- Driver type: Constant voltage
- Maximum load: 60W
- Output voltage: 12V DC
- Input voltage: 100-277V AC, 50/60 Hz
- Dimming: 5-in-1 / universal dimming compatible
- Class 2: Yes
- Approximate dimensions: 6.79 x 4.47 x 1.38 in (172 x 114 x 35 mm)
- Typical application: 12V LED strip and low-voltage lighting
- Watts60W
- FinishBlack
- Mounting TypePost or Wall Mount
- Volts12V DC
- TypeElectronic
- LocationOutdoor
- Height4.47"
- Width6.79
- Depth1.38"
- BrandAxite Lighting Canada
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
240 lm Bi-Pin G4 LED Lamp · 3W 12V 2700K · Omni-Directional for Landscape Retrofit · Brilliance LED BRI-G4-ECO-3-2700
BRI-G4-ECO-3-2700
Available to Order | Typically Arrives in 1 - 4 Weeks From Arizona Factory in USA21 – Loyalty Rewards- Edmonton Stock: 418
MT-0-BLK Axite Landscape Lighting Monet Spot Light 12V MR16 Black-Made In Canada
MT-0-BLK
160 – Loyalty RewardsMLE100-12DC-UD AXITE LIGHTING 100W 12V DIMMABLE 5 IN 1 LED DRIVER
MLE100-12DC-UD
Available For Backorder287 – Loyalty RewardsMLE120-12DC-UD AXITE LIGHTING 120W 12V DIMMABLE 5 IN 1 LED DRIVER
MLE120-12DC-UD
Available For Backorder321 – Loyalty RewardsMLE150-12DC-UD AXITE LIGHTING 150W 12V DIMMABLE 5 IN 1 LED DRIVER
MLE150-12DC-UD
Available For Backorder361 – Loyalty RewardsMLE200-12DC-UD AXITE LIGHTING 200W 12V DIMMABLE 5 IN 1 LED DRIVER
MLE200-12DC-UD
Available For Backorder400 – Loyalty RewardsMLE300-12DC-UD AXITE LIGHTING 300W 12V DIMMABLE 5 IN 1 LED DRIVER
MLE300-12DC-UD
Available For Backorder521 – Loyalty Rewards












