- Edmonton Stock: 77
2.4 w/ft COB LED Strip (Dot-Free) - 230 lm/ft · 2700K · 24V · 16 ft Continuous Light Output
What this product is for
This indoor COB LED strip is used where a smooth, continuous line of light is required instead of visible LED points. It is suited to architectural details, under-cabinet runs, shelving, millwork, closets, and display lighting.
Use for
Use for 24V DC indoor strip lighting installations in residential and light commercial spaces. It is a practical choice for aluminium channels with diffusers, toe-kick lighting, cabinet lighting, and joinery details where a clean finished appearance matters.
Avoid for
Avoid for direct 120V connection, outdoor wet-location use, or installations where an IP-rated strip is required unless additional protection is provided. Avoid long unsupported runs without confirming driver sizing, voltage drop, dimmer compatibility, and mounting surface conditions.
Best for
Best for warm ambient lighting at 2700K in kitchens, residential millwork, hospitality details, and display applications where dot-free output improves visual finish. As a typical rule of thumb, 24V strip lighting is often preferred for longer runs than lower-voltage systems because it can help reduce visible voltage drop. Actual performance depends on run length, feed location, driver selection, and installation conditions.
Installed in
Commonly installed in cabinets, valances, shelving, closets, feature walls, reception desks, and retail displays. This 16 ft (4.9 m) roll includes leads on both ends, with approximately 6 in (152 mm) lead wires at each end based on distributor listing content.
Why this product exists
COB strip is used to create a more uniform light line than conventional strip where diode dotting can show through shallow channels, reflective finishes, or close viewing distances. It helps electricians and lighting installers deliver a cleaner finished result in visible architectural applications.
Compared with similar products
Compared with standard LED ribbon, this COB strip is selected for dot-free appearance rather than maximum output. Compared with higher-output COB versions, this model is better suited to accent and decorative applications where warm colour temperature and visual uniformity are the priority over higher watt density.
Specifications
- Brand: Axite Lighting
- Manufacturer part number: EV2-COB-IN-16-24-2700
- Product type: Indoor COB LED strip, dot-free
- Voltage: 24V DC
- Power: 8 W/m
- Light output: approximately 230 lm/ft
- Colour temperature: 2700K warm white
- Roll length: 16 ft (4.9 m)
- Application: Indoor
- Typical use: Under-cabinet, millwork, closet, display, and architectural accent lighting
- Lead wires: approximately 6 in (152 mm) on each end
- BrandAxite Lighting Canada
- Warranty5 year
- Ribbon Lighting
- Watts per Ft8W
- Length16'
- Voltage24V DC
- LED Colour2700K
- CRI90
- CuttableEvery 2 inches
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 119
- Edmonton Stock: 360
- Edmonton Stock: 18
- Edmonton Stock: 8
- Edmonton Stock: 7
- Edmonton Stock: 5
- Edmonton Stock: 5
150 Watt 24V DC Dimmable Magnetic Driver EM150S24DC
EM150S24DC
Call Or Email To Confirm Delivery245 – Loyalty Rewards- Edmonton Stock: 3
- Edmonton Stock: 6




















