- Edmonton Stock: 206
Shallow LED Aluminum Channel · 8 ft (2.44 m) · Opal Lens · Axite Lighting SLC-002S
8 ft (2.44 m) shallow aluminum channel for LED strip installations with an opal lens to soften and diffuse the light output. Commonly used where a low-profile surface channel is needed for millwork, under-cabinet, shelf, and accent lighting; actual light appearance depends on the LED strip, spacing, and installation conditions.
What this product is for
This shallow LED aluminum channel is used to mount and finish LED strip lighting in a clean, low-profile housing. The opal lens helps reduce diode visibility and provides a more even light line than exposed tape light alone.
Use for
- Under-cabinet and over-cabinet strip lighting
- Shelving, display, and millwork lighting
- Accent lighting in residential and light commercial interiors
- Surface-mounted LED strip runs where a slim finished appearance is required
Avoid for
- Applications requiring a recessed mud-in or trimless channel
- Installations needing a deeper channel to further reduce LED dotting
- Outdoor or wet-location use unless the full strip-light system is specifically rated for that environment
Best for
Best for electricians and lighting installers who need a shallow surface channel with a diffused lens for a neat finished look. This style is commonly chosen where space is limited and where the LED strip needs basic mechanical protection and cleaner light diffusion.
Installed in
Typically installed in kitchens, millwork, retail displays, shelving, coves, and architectural accent lighting details. Common indoor mounting locations include cabinets, casework, walls, and ceilings where an 8 ft (2.44 m) channel length suits the run layout.
Why this product exists
LED strip needs a mounting surface, lens, and finished profile to look professional on completed jobs. This channel provides an anodized aluminium housing with an opal polycarbonate lens, helping protect the strip and improve the visual finish of the installation.
Compared with similar products
Compared with a bare LED strip, this channel gives a cleaner installation and softer light output. Compared with deeper channels, a shallow profile is easier to fit in tight spaces but may show more LED dotting depending on strip density. As typical guidance, higher-density tape light usually produces a more continuous line through opal lenses. Actual appearance depends on strip selection, mounting position, and viewing angle.
Specifications
- Manufacturer part number: SLC-002S
- Brand: Axite Lighting
- Product type: Shallow LED aluminum channel / extrusion
- Length: 8 ft (2.44 m)
- Profile size: 17.1 mm x 8 mm (approximately 0.67 in x 0.31 in)
- Material: Anodized aluminium extrusion
- Lens: Opal polycarbonate
- Mounting style: Shallow surface profile
- Typical application: LED strip light mounting and diffusion
- Warranty: 5 years
Typical guidance only: channel depth and lens style affect diffusion, but final light uniformity also depends on LED strip density and output. Actual performance depends on installation conditions, strip selection, layout, and local electrical code.
- Length8 Ft
- StyleShallow Surface
- Lens ColourOpalescent
- Similar ToRJCROSS OR DIFFUSION SLC002S
- BrandAxite Lighting Canada
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 106
- Edmonton Stock: 28
- Edmonton Stock: 23
- Edmonton Stock: 11
- Edmonton Stock: 17
- Edmonton Stock: 4
3 w/ft Under Cabinet LED Strip - 254 lm/ft · 3000K · 24V · 16 ft
EV3-IN-16-24V-3000
Restocking89 – Loyalty Rewards- Edmonton Stock: 3
