- Edmonton Stock: 87
45° LED aluminum corner channel · 8 ft (2.44 m) · frosted lens · Axite Lighting Canada SLC-007T
What this product is for
This 45° LED aluminium corner channel is used to mount and finish LED strip lighting in inside corners where the light needs to be aimed outward at an angle rather than straight down. The frosted lens helps diffuse the strip and provides a cleaner finished appearance for architectural and millwork installations.
Use for
- Under-cabinet and over-cabinet LED strip runs
- Display shelving, casework, and retail millwork
- Closets, wardrobes, and accent lighting details
- Residential and light commercial interior applications
Avoid for
- Applications requiring a fully sealed wet-location fixture unless the complete system is rated for that use
- Projects where exact optical performance is required without confirming strip width, lens fit, and mounting accessories
- Heavy-impact areas where an exposed lens may be damaged
Best for
Best for electricians, lighting installers, and millwork trades that need a neat 45° corner profile for LED tape light. This style is typically chosen when a straight surface channel would not aim the light correctly or would leave the strip too visible.
Installed in
Commonly installed in kitchen cabinetry, shelving, display cases, feature walls, closets, hospitality millwork, and other interior architectural lighting details.
Why this product exists
LED strip alone can leave exposed tape, visible diodes, and inconsistent aiming. A corner extrusion provides mechanical support, cleaner mounting, and improved light control, while the frosted lens helps reduce dotting. As a rule of thumb, diffusion improves as LED density increases; actual performance depends on strip spacing, output, and viewing angle.
Compared with similar products
Compared with a flat surface channel, a 45° corner channel directs light diagonally into the space, which is often preferred for under-cabinet and display applications. Compared with lens-free mounting, this profile provides a more finished appearance and added protection for the LED strip. Exact accessory pack contents and strip compatibility should be confirmed before ordering.
Specifications
- Product type: LED strip light aluminium channel / extrusion
- Profile: 45° corner / angled channel
- Lens: Frosted / translucent diffuser lens
- Length: 8 ft (2.44 m)
- Material: Aluminium channel with diffuser lens
- Application: Interior architectural, accent, cabinet, shelving, and display lighting
- Typical use: LED strip mounting and light diffusion
- Buying note: Confirm LED strip width and required mounting clips/end caps before purchase
Typical guidance only: channel and lens performance can vary with strip width, wattage, diode density, and installation method. Actual performance depends on installation conditions, layout, and local electrical code.
- Length8 Ft
- StyleAngled
- Lens ColourTranslucent
- Similar ToRJCROSS OR DIFFUSION SLC007T
- BrandAxite Lighting Canada
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 210
- Edmonton Stock: 28
- Edmonton Stock: 23
- Edmonton Stock: 11
60 Watt 24V DC Dimmable Electronic Driver MLE60-24DC-P
MLE60-24DC-P
Available to Order | Typically Arrives in 1 - 3 Weeks102 – Loyalty Rewards- Edmonton Stock: 14
LED ribbon power feed clip · for 1W or 3W ribbon · clip-style power connection · Axite Lighting H8W1
H8W1
Restocking2 – Loyalty Rewards3 w/ft Under Cabinet LED Strip - 254 lm/ft · 3000K · 24V · 16 ft
EV3-IN-16-24V-3000
Restocking89 – Loyalty Rewards

















