- Edmonton Stock: 11
LED ribbon butt coupler clip · transparent · zero dot connection · Axite Lighting Canada SW-T0-SW-8-H8W2
Transparent butt coupler clip for joining compatible zero dot LED ribbon sections with a clean, low-visibility connection. Commonly used to extend or join strip runs where a continuous light line is preferred; compatibility should be confirmed with the matching Axite ribbon system and connector style.
Delivered to you by Jun 11 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This LED ribbon butt coupler clip is used to join compatible zero dot LED ribbon sections in a straight run. The transparent body helps keep the connection less visible in finished lighting installations.
Use for
- Joining compatible Axite zero dot LED ribbon sections
- Creating cleaner linear lighting runs in millwork, coves, shelves, and accent applications
- Residential and light commercial LED strip installations
Avoid for
- LED ribbon that does not match the connector style or width
- Applications requiring a lead wire, power feed, or corner connection
- Outdoor or wet-location use unless the full ribbon system is specifically rated for it
Best for
Best for electricians and lighting installers who need a simple in-line strip-to-strip connection while maintaining a continuous zero dot appearance. This style is typically chosen where a neat visual finish matters more than using soldered field connections.
Installed in
Commonly installed in undercabinet lighting, display lighting, shelving, architectural coves, and other indoor LED ribbon applications. It is generally used inside compatible profiles, channels, cabinets, or concealed strip-light layouts.
Why this product exists
It provides a faster way to join compatible LED ribbon sections without a more labour-intensive field splice. For many strip-light layouts, clip-style connectors can reduce installation time and help maintain alignment at the joint.
Compared with similar products
Compared with a butt connector clip, a power feed clip is used to bring power onto the ribbon rather than join two strip sections. Compared with soldered joins, this coupler clip is typically faster to install, but exact fit and long-term performance depend on ribbon compatibility, mounting conditions, and installation practice.
Typical guidance only: clip connectors are commonly used where serviceability and installation speed matter. Actual performance depends on ribbon construction, mounting pressure, layout, and local electrical code.
Specifications
- Product type: LED ribbon butt coupler clip
- Application: Strip-to-strip in-line connection
- Design: Transparent housing
- Lighting system type: Zero dot / COB-style ribbon accessory
- Brand: Axite Lighting Canada
- Manufacturer part number: SW-T0-SW-8-H8W2
- Legacy related listing reference: T0-SW-8-H8W0 appears on distributor and manufacturer listings for similar/related butt coupler and butt connector clip accessories
- Typical use: Indoor LED ribbon installations
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 24
- Edmonton Stock: 7
- Edmonton Stock: 20
- Edmonton Stock: 82
- Edmonton Stock: 123
- Edmonton Stock: 8
750 lm 4 in Round Slim LED Downlight · 9W · 5CCT Selectable · Synco SSL-4-5C
SSL-4-5C
14 – Loyalty Rewards- Edmonton Stock: 138
- Stocking Transition · Limited Availability
- Edmonton Stock: 220
- Stocking Transition · Limited Availability
