- Edmonton Stock: 81
LED ribbon joiner connector · 6 in cable · for 1W and 3W ribbon sections · Axite Lighting Canada H8W2-3W
6 in (152 mm) LED ribbon joiner connector for linking compatible 1W and 3W Axite ribbon lighting sections. Intended for clean strip-to-strip connections in cabinet, accent, and display lighting layouts where a short flexible jumper helps with alignment and installation.
Delivered to you by Jun 11 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This LED ribbon joiner connector is used to connect compatible 1W and 3W ribbon lighting sections with a short 6 in (152 mm) flexible link. It helps maintain continuity where a direct strip-to-strip connection is not practical.
Use for
- Joining compatible Axite LED ribbon sections
- Cabinet, cove, display, and accent lighting runs
- Installations requiring a short flexible offset between ribbon sections
- Service or retrofit work where matching ribbon accessories are required
Avoid for
- Non-compatible ribbon systems or unknown strip formats
- Applications requiring a longer extension lead
- Outdoor or wet-location use unless the full ribbon system is specifically rated for it
Best for
Best for electricians and lighting installers who need a simple joiner to bridge a short gap or make a cleaner connection between matching low-voltage ribbon sections.
Installed in
Typically installed in undercabinet lighting, shelving, millwork, display cases, coves, and other indoor low-voltage LED ribbon applications.
Why this product exists
Ribbon layouts often need a small amount of flexibility at corners, offsets, or service points. A short joiner cable can simplify installation and reduce strain compared with forcing two ribbon sections into a tight direct connection.
Compared with similar products
Compared with rigid couplers, a 6 in (152 mm) joiner provides more installation flexibility. Compared with longer leads, it is better suited to short transitions where excess cable is not wanted. Typical LED strip practice is to keep accessory connections matched to the ribbon series and wattage family for fit and electrical compatibility.
Actual compatibility depends on the ribbon series, connector format, and manufacturer system requirements.
Specifications
- Product type: LED ribbon joiner connector
- Length: 6 in (152 mm)
- Application: Connects compatible LED ribbon sections
- Compatibility: 1W and 3W ribbon lighting, as listed
- Product class: Ribbon Lighting accessory
- Brand: Axite Lighting Canada
- Manufacturer part number: H8W2-3W
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 4
Shallow LED Aluminum Channel · 8 ft (2.44 m) · Opal Lens · Axite Lighting SLC-002S
SLC-002S
Restocking38 – Loyalty Rewards- Edmonton Stock: 39
- Edmonton Stock: 219
- Edmonton Stock: 62
- Edmonton Stock: 82
- Edmonton Stock: 123
- Edmonton Stock: 360
- Edmonton Stock: 8
- Edmonton Stock: 3
