- Edmonton Stock: 219
:
from
to
Clear
Clear
LED ribbon joiner connector · 6 in lead · for 1W/3W ribbon sections · Axite Lighting Canada H10W2
SKU: H10W2
6 in (152 mm) LED ribbon joiner connector for linking compatible 1W and 3W ribbon lighting sections. Commonly used where a short flexible jumper is needed between strip runs or around small offsets; compatibility should be confirmed against ribbon width and connector style before ordering.
Delivered to you by Jul 25 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This LED ribbon joiner connector is used to connect compatible ribbon lighting sections with a short 6 in (152 mm) lead between them. It is intended for strip lighting layouts where a direct end-to-end connection is not practical.
Use for
Use for joining compatible 1W and 3W LED ribbon sections, bridging small gaps, or making slight turns and offsets in display, accent, cove, or under-cabinet ribbon lighting runs. It is commonly selected when installers need a solderless or pre-made connection point instead of field splicing.
Avoid for
Avoid using this connector with incompatible ribbon widths, pin layouts, or strip families. It should not be treated as a universal LED strip connector, and it is not a substitute for checking voltage, conductor count, and physical fitment.
Best for
Best for electricians and lighting installers working with matching Axite ribbon systems who need a short jumper between sections while keeping the installation neat and serviceable.
Installed in
Typically installed in residential and light commercial LED ribbon applications such as millwork lighting, shelving, display lighting, coves, and under-cabinet runs where a short flexible connection is required.
Why this product exists
Ribbon lighting often needs a small flexible connection to get around corners, gaps, or mounting interruptions. A 6 in (152 mm) joiner helps maintain continuity between compatible ribbon sections without forcing a tight bend at the strip itself.
Typical guidance only: short joiners are commonly used to reduce strain at connection points and simplify layout changes. Actual performance depends on strip compatibility, installation conditions, and local electrical code.
Compared with similar products
Compared with rigid couplers, a wired joiner provides more flexibility when the ribbon path is not perfectly straight. Compared with field-soldered connections, a pre-made joiner can speed installation, but exact compatibility with the ribbon series remains the key buying factor.
Specifications
- Product type: LED ribbon joiner connector
- Manufacturer part number: H10W2
- Brand: Axite Lighting Canada
- Lead length: 6 in (152 mm)
- Application: Connects compatible LED ribbon sections
- Compatible ribbon styles: 1W and 3W, based on legacy listing data
- Installation note: Confirm ribbon width, conductor layout, and series compatibility before purchase
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 62
- Edmonton Stock: 12
4.5 w/ft High Output LED Strip - 370 lm/ft · 2700K · 24V · 16 ft
EV5-IN-16-24V-2700K
138 – Loyalty Rewards- Edmonton Stock: 14
4.5 w/ft High Output LED Strip - 390 lm/ft · 3000K · 24V · 16 ft
EV5-IN-16-24V-3000K
138 – Loyalty Rewards4.5 w/ft High Output LED Strip - 425 lm/ft · 4100K · 24V · 16 ft
EV5-IN-16-24V-4100K
Available For Backorder138 – Loyalty Rewards- Edmonton Stock: 77
- Edmonton Stock: 119
- Edmonton Stock: 360
- Edmonton Stock: 8
- Edmonton Stock: 134
