- Edmonton Stock: 219
:
from
to
Clear
Clear
LED ribbon power feed clip · for Style 1/3W ribbon · strip-to-power connection · Axite Lighting H10W1
SKU: H10W1
Power feed clip for Axite Style 1W and 3W LED ribbon installations. Used to connect compatible ribbon to the power feed for a clean, serviceable strip-light installation in residential or commercial applications.
Delivered to you by Jul 25 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
The H10W1 is a power feed clip for compatible Axite LED ribbon systems in Style 1W and 3W formats. It provides the connection point between the ribbon and the incoming power feed, helping simplify strip-light installation and replacement.
Use for
Use for connecting compatible Axite LED ribbon to the power source in under-cabinet, cove, display, accent, and architectural lighting layouts. This type of accessory is commonly used where a neat ribbon termination and reliable feed connection are required.
Avoid for
Avoid using this clip with non-compatible ribbon widths, different ribbon families, or where a soldered connection is specifically required by the manufacturer or project conditions. Do not assume cross-compatibility with 8W, 12W, COB, or other ribbon styles.
Best for
Best for electricians and lighting installers working on Axite ribbon jobs that use Style 1W or 3W tape and need a matching power feed accessory rather than a field-modified connection.
Installed in
Typically installed in millwork, shelving, coves, display cases, valances, and other dry-location ribbon lighting assemblies, depending on the rating of the connected ribbon system and enclosure.
Why this product exists
Ribbon lighting systems often need model-specific connection hardware to maintain fit and electrical contact. This clip is intended to reduce installation time compared with improvised terminations and to support a cleaner finished result.
Compared with similar products
This is a power feed clip, not a butt connector. Choose a power feed clip when you need to bring power to the ribbon run; choose a butt connector when joining two ribbon sections end-to-end. For longer LED strip runs, 24V systems are typically preferred to help manage voltage drop, but actual performance depends on run length, load, layout, and local electrical code.
Specifications
- Manufacturer part number: H10W1
- Brand: Axite Lighting
- Product type: LED ribbon power feed clip
- Compatible ribbon style: Style 1W / 3W
- Application: LED strip/ribbon power connection
- Category: Accessories for LED strip lights
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 12
4.5 w/ft High Output LED Strip - 370 lm/ft · 2700K · 24V · 16 ft
EV5-IN-16-24V-2700K
138 – Loyalty Rewards- Edmonton Stock: 14
4.5 w/ft High Output LED Strip - 390 lm/ft · 3000K · 24V · 16 ft
EV5-IN-16-24V-3000K
138 – Loyalty Rewards4.5 w/ft High Output LED Strip - 425 lm/ft · 4100K · 24V · 16 ft
EV5-IN-16-24V-4100K
Available For Backorder138 – Loyalty Rewards- Edmonton Stock: 77
- Edmonton Stock: 119
- Edmonton Stock: 360
- Edmonton Stock: 134
- Edmonton Stock: 8
- Edmonton Stock: 396
