- Edmonton Stock: 175
:
from
to
Clear
Clear
Silicone End Cap · for Outdoor LED Ribbon · Cut-End Seal Accessory · Axite Lighting Canada EV-ENDCAP
SKU: EV-ENDCAP
Silicone end cap for terminating and sealing the cut end of compatible outdoor LED ribbon or tape light runs. Commonly used with silicone sealant to help restore moisture resistance after field cutting; actual protection depends on strip compatibility, sealant, and installation method.
Delivered to you by Aug 22 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This silicone end cap is an LED strip light accessory used to close the exposed end of a compatible outdoor ribbon or tape light after cutting. It helps protect the strip end from moisture, dust, and debris when installed with the appropriate silicone sealant or adhesive.
Use for
- Outdoor LED ribbon and tape light terminations
- Landscape lighting accents, soffits, steps, and architectural strip lighting
- Field-cut strip light runs where the open end needs to be capped
- Installations where maintaining the strip's outdoor protection is important
Avoid for
- Non-compatible strip widths or profiles
- Installations where the strip manufacturer requires a different end seal method
- Applications where the cap is installed dry without the recommended sealant, if waterproofing is required
- Mechanical protection in place of a proper extrusion or channel system
Best for
Best for electricians and lighting installers finishing outdoor LED ribbon runs neatly and helping protect the cut end from the elements. This type of accessory is typically used where the strip has been cut to length on site and the exposed end needs a simple closure.
Installed in
Commonly installed in outdoor accent lighting, landscape features, under-soffit lighting, step details, signage accents, and other low-voltage LED strip applications. Typical practice is to fit the cap to the strip end and use electrical-grade silicone or the manufacturer's recommended sealant.
Why this product exists
Outdoor LED ribbon often needs to be cut to suit the layout. Once cut, the open end can lose its original environmental protection. A silicone end cap provides a practical way to close that end and, when paired with sealant, can help restore the strip's resistance to moisture and contaminants.
Compared with similar products
Compared with generic end caps, a product-specific silicone cap is typically preferred because fit matters for strip width, jacket style, and outdoor sealing. For LED strip installations, 24V systems are commonly preferred for longer runs to help reduce voltage drop, but end-cap selection still depends on the exact strip series. Actual performance depends on installation conditions, sealant, layout, and local electrical code.
Specifications
- Product type: Silicone end cap for LED ribbon/tape light
- Application: Outdoor strip light cut-end termination
- Material: Silicone
- Function: Helps seal the exposed end of a compatible strip light
- Compatibility: Confirm exact fit with the matching Axite outdoor ribbon or tape light series before ordering
- Installation note: Commonly installed with silicone sealant or adhesive for moisture resistance
- Market: Canada
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 336
- Edmonton Stock: 966
- Edmonton Stock: 15
- Edmonton Stock: 12
