- Edmonton Stock: 979
:
from
to
Clear
Clear
End Cap · Shallow Profile Channel Accessory · For Axite SLC-002 Series · Axite Lighting SLC-002CAP
SKU: SLC-002CAP
End cap for Axite shallow profile LED strip channel systems, used to close the open end of the extrusion for a cleaner finished installation. Commonly used in under-cabinet, cove, display, and architectural strip lighting where a neat channel termination is required.
Delivered to you by Sep 18 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
The Axite Lighting SLC-002CAP is an end cap for Axite shallow profile LED strip light channel systems. It is used to finish the open end of the extrusion and give the installation a cleaner, more complete appearance.
Use for
- Closing the end of an Axite shallow profile channel
- Under-cabinet LED strip installations
- Cove, shelf, display, and millwork lighting
- Residential and light commercial linear lighting projects
Avoid for
- Channels outside the Axite SLC-002 shallow profile family unless fit is confirmed
- Applications where a different profile, recessed channel, or deep channel accessory is required
- Installations where lens, channel, and mounting hardware have not been matched to the same series
Best for
Best for electricians and lighting installers who need a simple finishing accessory for Axite shallow surface-mount strip channel runs. It helps complete the channel ends neatly in visible architectural lighting applications.
Installed in
Typically installed at the end of shallow aluminium LED strip channels in kitchens, retail displays, shelving, coves, millwork, and other indoor linear lighting layouts.
Why this product exists
LED strip channel systems are usually built from multiple matched components: channel, lens, clips, and end caps. This end cap exists to complete the SLC-002 shallow profile assembly and provide a more finished channel termination.
Compared with similar products
Compared with a mounting clip, this part does not support or fasten the channel; it finishes the end. Compared with end caps for other Axite channel families, this accessory is intended for the shallow SLC-002 profile and should be matched by series rather than by appearance alone.
Specifications
- Manufacturer part number: SLC-002CAP
- Brand: Axite Lighting
- Product type: End cap
- Product family: Shallow profile channel accessory
- Compatible series: Axite SLC-002 shallow profile channel system
- Application: LED strip light extrusion/channel finishing
- Installation location: End of channel
- Typical use: Indoor linear lighting installations
- Material: Not confirmed from source
- Colour/finish: Not confirmed from source
- Dimensions: Not confirmed from source
Typical guidance: end caps are selected by exact channel series compatibility, not by approximate size. Actual fit depends on the matching extrusion profile and accessory set.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 94
- Edmonton Stock: 79
- Edmonton Stock: 293
- Edmonton Stock: 22
3 w/ft Under Cabinet LED Strip - 254 lm/ft · 3000K · 24V · 16 ft
EV3-IN-16-24V-3000
89 – Loyalty Rewards
