- Edmonton Stock: 3
1.5 w/ft Accent LED Strip - 127 lm/ft · 3000K · 24V · 100 ft
What this product is for
This indoor LED strip is used for low-output accent lighting in residential and light commercial interiors. It provides warm 3000K light with 127 lumens per foot and 90 CRI for applications where visual comfort and colour quality matter more than high output.
Use for
- Under-cabinet accent lighting
- Toe-kick lighting
- Shelf and display lighting
- Cabinet interiors
- Backlighting for mirrors, floating walls, and media features
- Long custom runs using a 24V driver and compatible ribbon accessories
Rule of thumb: 1.5W/ft LED strip is typically chosen for accent lighting rather than task or primary room lighting. Actual performance depends on mounting surface, lens/channel selection, spacing, and installation conditions.
Avoid for
- Primary room lighting
- High-output task lighting on deep counters or work surfaces
- Outdoor or wet-location installations unless a specifically rated outdoor strip is used
- Installations without a compatible 24V DC LED driver
Best for
Best for electricians, millwork installers, and lighting contractors specifying warm-white ribbon lighting for cabinetry, shelving, and architectural details. The 90 CRI output is better suited to residential finish work and display areas than lower-CRI strip lighting.
Installed in
Typically installed in kitchens, vanities, built-ins, closets, feature walls, retail displays, and other dry indoor spaces. For cleaner light distribution and better finish protection, this type of strip is commonly paired with an aluminium channel and lens.
Why this product exists
This product fills the need for long-run indoor accent lighting where contractors want warm colour temperature, good colour rendering, and 24V strip compatibility in a 100 ft (30.5 m) roll format. Compared with higher wattage strip, it is intended to add visual effect without overpowering the space.
Compared with similar products
Compared with higher-output LED strip, this 1.5W/ft model is better suited to ambient and decorative applications. A typical buying rule is that 1.5W/ft strip is used for accent lighting, around 3W/ft for task lighting, and 5W/ft or more where strip is expected to contribute more significantly to general illumination. Actual results vary by layout, reflectance, and diffuser choice.
Specifications
- Brand: Axite
- Manufacturer part number: EV1-IN-100-24V-3000
- Product type: Indoor LED strip / ribbon light
- Voltage: 24V DC
- Power: 1.5W/ft
- Light output: 127 lm/ft
- Colour temperature: 3000K
- CRI: 90
- Roll length: 100 ft (30.5 m)
- Application: Indoor, dry-location accent lighting
- Warranty: 5 year
- Approximate roll weight: 1.38 lb (0.63 kg)
- Lumens per Foot127 lm/ft
- Watts per Foot1.5 w/ft
- ApplicationAccent Lighting (Low Output)
- Color Temperature3000K
- Colour Rendering91+ Cri
- Volts24 Vdc
- Cross ReferenceRJ Cross SL1-IN-100-24V-3000
- Length100'
- BrandAxite Lighting Canada
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 11
LED ribbon power feed clip · for 1W or 3W ribbon · clip-style power connection · Axite Lighting H8W1
H8W1
Restocking2 – Loyalty Rewards- Edmonton Stock: 62
- Edmonton Stock: 116
- Edmonton Stock: 215
- Edmonton Stock: 39
- Edmonton Stock: 46
- Edmonton Stock: 21
- Edmonton Stock: 167
- Edmonton Stock: 8
- Edmonton Stock: 7
- Edmonton Stock: 23


















