- Edmonton Stock: 5
:
from
to
Clear
Clear
40 Watt 24V DC Dimmable Magnetic Driver ML40S24DC
SKU: ML40S24DC
40W magnetic constant-voltage LED driver with 24V DC output and dimmable operation for compatible low-voltage LED lighting systems. Commonly used for 24V LED strip and accent lighting where magnetic dimming is required; actual loading and dimming performance depend on fixture compatibility, wire run, and installation conditions.
Delivered to you by Aug 17 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This 40W magnetic LED driver converts line voltage power to 24V DC for compatible constant-voltage LED lighting. It is intended for dimmable low-voltage applications such as LED strip, tape, and accent lighting where a magnetic driver is specified.
Use for
Use for 24V DC LED strip lighting, cove lighting, under-cabinet lighting, display lighting, and other low-voltage installations that require a dimmable magnetic driver. A practical rule of thumb for LED strip sizing is to keep total connected load below the driver maximum to allow operating headroom.
Avoid for
Avoid using this driver with constant-current LED products, fixtures that do not specify 24V DC input, or non-dimmable systems where a magnetic dimmable driver is not required. Do not size the connected load above 40W.
Best for
Best for electricians and lighting installers matching an existing 24V magnetic dimming system or specifying a compact 40W driver for smaller LED strip runs. Typical guidance for LED strip projects is to size the driver at about 125% of connected wattage where practical; actual performance depends on installation conditions, insulation, layout, dimmer compatibility, and local electrical code.
Installed in
Typically installed in residential and light commercial millwork, cabinets, shelving, soffits, and display applications. Suitable for indoor or outdoor low-voltage lighting applications where the connected fixture system is rated for use with this type of magnetic 24V DC driver.
Why this product exists
This driver provides the required 24V DC power for low-voltage LED systems while supporting dimming in applications where magnetic low-voltage control is preferred or already in place. It helps match driver type to the lighting load for smoother system integration.
Compared with similar products
Compared with non-dimmable drivers, this model is intended for installations where light level control is needed. Compared with higher-wattage 24V drivers, the 40W size is commonly used for shorter runs and lower connected loads, which can simplify smaller cabinet, accent, and display lighting layouts.
Specifications
- Manufacturer part number: ML40S24DC
- Brand: Axite Lighting Canada
- Product type: Magnetic LED driver
- Power rating: 40W
- Output voltage: 24V DC
- Dimming: Yes, dimmable magnetic driver
- Driver type: Constant-voltage, magnetic low-voltage style
- Common applications: 24V LED strip and low-voltage accent lighting
- Watts40W
- FinishBlack
- Mounting TypePost or Wall Mount
- Volts24V DC
- TypeMagnetic
- LocationOutdoor
- Height7.38"
- Width2.11"
- Depth1.6"
- BrandAxite Lighting Canada
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 5
- Edmonton Stock: 376
- Edmonton Stock: 34
3 w/ft Under Cabinet LED Strip - 254 lm/ft · 3000K · 24V · 16 ft
EV3-IN-16-24V-3000
89 – Loyalty Rewards- Edmonton Stock: 20
- Edmonton Stock: 8
- Edmonton Stock: 18
