1200 Lumens 15 Watts PAR 38 Flood 4K Satco S29448
What this product is for
This PAR38 LED lamp is used for directional flood lighting in recessed cans, track heads, security fixtures, and outdoor lamp holders that accept an E26 medium base lamp on 120V circuits. It delivers 1200 lumens of 4000K cool white light with a 40° beam for controlled general or task lighting.
Use for
Use for exterior flood lights, soffit fixtures, garages, workshops, display lighting, and commercial or residential areas where a cooler white colour temperature is preferred. It is dimmable and rated for wet locations, making it suitable for many indoor and outdoor applications.
Avoid for
Avoid using this lamp where a wide beam spread is needed for broad area wash lighting, or where the fixture requires a different base, voltage, or lamp shape. Confirm dimmer compatibility before installation on existing controls.
Best for
Best for electricians and maintenance buyers replacing PAR38 halogen or incandescent floods with an LED lamp that keeps the familiar PAR38 form factor while reducing wattage. A 40° beam is commonly used where more focus is needed than a wide flood.
Installed in
Typically installed in 5 in to 6 in recessed cans, outdoor floodlight heads, and other PAR38-compatible fixtures. Lamp size is approximately 4.72 in diameter x 5.0 in overall length (120 mm x 127 mm).
Why this product exists
This lamp provides a straightforward LED replacement for higher-wattage PAR38 lamps while maintaining E26 medium base compatibility, dimming capability, and enclosed-fixture suitability. For many retrofit jobs, it helps reduce relamping frequency with a rated life of 25,000 hours.
Compared with similar products
Compared with wider-beam PAR38 lamps, this 40° version gives more controlled light on signs, work areas, displays, and exterior zones. Compared with warmer 2700K to 3000K lamps, 4000K is typically chosen for neutral-to-cool commercial light appearance and clearer task visibility. Actual lighting results depend on mounting height, spacing, reflectors, and site conditions.
Specifications
- Manufacturer part number: S29448
- Brand: Satco
- Lamp type: LED PAR38
- Light output: 1200 lumens
- Power: 15W
- Voltage: 120V
- Colour temperature: 4000K cool white
- Beam angle: 40°
- CRI: 90+
- Base: E26 medium
- Dimming: Yes, phase-cut / forward or reverse phase dimming
- Location rating: Wet location
- Fixture suitability: Rated for enclosed fixtures
- Operating temperature: -4°F to 113°F (-20°C to 45°C)
- Rated life: 25,000 hours
- Dimensions: 4.72 in diameter x 5.0 in MOL (120 mm x 127 mm)
- Warranty: 5 years
- Typical replacement guidance: commonly used as an LED replacement for about a 90W incandescent PAR38 lamp; verify light levels and beam spread for the application.
- BrandSatco Lighting
- Warranty5 year
- Lamps
- Lumens1200
- DimmableDimmable
- Watts15W
- Color Temperature4000K
- Volts120V
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.