1200 Lumens 15 Watts PAR 38 Flood 3K Satco S29446
What this product is for
This PAR38 LED lamp is used to replace medium-base flood lamps in recessed cans, outdoor security fixtures, soffit lights, and directional flood applications. It delivers 1200 lumens at 3000K with a 40° beam for controlled flood lighting.
Use for
Use for indoor or outdoor fixtures rated for PAR38 lamps with an E26 medium base on 120V circuits. Common applications include exterior flood lighting, accent lighting, recessed downlights, and light commercial directional lighting where dimming and wet location rating are required.
Avoid for
Avoid using this lamp where a different beam spread, base type, voltage, or colour temperature is required. Do not use it as a substitute for line-voltage lamps in controls or fixtures that are not compatible with phase-cut dimming.
Best for
Best for electricians and maintenance buyers needing a 90W incandescent replacement with lower watt draw, enclosed-fixture suitability, and wet location performance. The 40° beam is typically chosen when you want more control than a wide flood without moving into a narrow spot beam.
Installed in
Installs in standard E26 medium-base PAR38 fixtures. Lamp diameter is approximately 4.72 in (120 mm) with an overall length of 5.0 in (127 mm), which helps when checking trim, can, and fixture clearance.
Why this product exists
This lamp provides a lower-energy LED replacement for PAR38 incandescent flood lamps while maintaining familiar lamp shape, dimming capability, and directional beam control. It is rated for enclosed fixtures and wet locations, which helps reduce relamping frequency in harder-to-access installations.
Compared with similar products
Compared with wider-beam PAR lamps, this 40° version gives more focused light on signs, entries, displays, or architectural features. Compared with non-dimmable lamps, it offers better control for residential and commercial spaces using compatible 120V phase-cut dimmers.
Typical lighting guidance only: 3000K is commonly used where a warmer appearance is preferred, while narrower beam lamps are often selected when more punch on the target is needed. Actual light levels depend on mounting height, spacing, surface reflectance, and fixture design.
Specifications
- Manufacturer part number: S29446
- Brand: Satco
- Lamp type: LED PAR38
- Light output: 1200 lumens
- Power: 15W
- Voltage: 120V
- Colour temperature: 3000K soft white
- CRI: 90+
- Beam angle: 40°
- Base: E26 medium base
- Dimming: Yes, 120V phase-cut; forward phase or reverse phase compatible
- Rated life: 25,000 hours
- Incandescent equivalent: 90W
- Location rating: Wet location
- Fixture suitability: Rated for enclosed fixtures
- Operating temperature: -4°F to 113°F (-20°C to 45°C)
- Dimensions: 4.72 in diameter x 5.0 in length (120 x 127 mm)
- Safety listing: cULus listed
- Warranty: 5 years
- BrandSatco Lighting
- Warranty5 year
- Lamps
- Lumens1200
- DimmableDimmable
- Watts15W
- Color Temperature3000K
- Volts120V
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.