1250 Lumens 15 Watts PAR 38 Flood 4K Eiko LED15WPAR38/FL/840-DIM-G9
What this product is for
This PAR38 LED lamp is for 120V screw-base fixtures that need a dimmable flood beam with neutral 4000K light. It is suited to recessed cans, track lighting and many enclosed-style outdoor flood applications where a PAR38 shape and E26 medium base are required.
Use for
Use for directional lighting in residential, commercial and light industrial spaces, including display lighting, soffits, security floods and general area lighting. The 40° flood beam is commonly chosen when you want a controlled spread rather than a wide omni-directional lamp.
Avoid for
Avoid for fixtures that require a different lamp shape, a narrower spot beam, a lower colour temperature such as 2700K or 3000K, or a non-dimmable lamp. Confirm fixture rating, dimmer compatibility and location rating before ordering.
Best for
Best for buyers replacing 120W PAR38 incandescent lamps with a lower-wattage LED option while keeping a familiar PAR38 form factor, E26 base and flood distribution. 4000K is typically selected for cleaner task and commercial lighting compared with warmer residential tones.
Installed in
Installed in PAR38-compatible recessed housings, track heads, outdoor floodlights and other 120V fixtures with an E26 medium socket. Lamp size is approximately 5.12 in H x 4.72 in dia. (130 x 120 mm), so verify clearance in tight trims or shrouds.
Why this product exists
This lamp provides a directional LED replacement for incandescent PAR38 lamps, reducing wattage while maintaining useful beam control and dimming capability. It is a practical choice when the fixture is still serviceable and only the lamp needs replacement.
Compared with similar products
Compared with narrower PAR38 lamps, the 40° flood beam gives broader coverage for general accent and area lighting. Compared with warmer 2700K or 3000K versions, 4000K reads more neutral and is commonly used in commercial and utility spaces. As a rule of thumb, PAR38 lamps in the 1200 to 1400 lumen range are often selected as replacements for older 120W incandescent floods, but actual light levels depend on fixture design, mounting height and beam aiming.
Actual performance depends on installation conditions, dimmer compatibility, fixture layout and local electrical code.
Specifications
- Brand: Eiko
- Manufacturer part number: LED15WPAR38/FL/840-DIM-G9
- Order code: 10780
- Product type: LED PAR38 lamp
- Lumen output: 1250 lm
- Power: 15 W
- Colour temperature: 4000K
- CRI: >80
- Beam angle: 40° flood
- Dimming: Yes
- Voltage: 120VAC
- Base: E26 medium screw base
- Rated life: 25,000 hours
- Incandescent replacement: approximately 120W
- Maximum overall length: 5.12 in (130 mm)
- Diameter: 4.72 in (120 mm)
- Availability noted by manufacturer: USA and Canada
- BrandEiko Lighting
- Warranty5 year
- Lamps
- Replaces100W
- Lumens1250
- DimmableDimmable
- Watts15W
- Color Temperature4000K
- Volts120V
- CRI80+
- ShapePAR38
- Beam Angle40°
- Diameter4.75"
- Overall Length5.25"
- BaseMedium
- Bulb FinishPrismatic Lens
- Rated Life25000
- Pack Size1
- Case Quantity10
- Energy StarYes
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.