520 Lumens 6.5 Watts PAR20 LED Lamp 3K Satco Lighting S29406
What this product is for
This PAR20 LED lamp is used for accent, display, and directional flood lighting in fixtures that take a medium E26 base lamp on 120V circuits. It delivers 520 lumens with a 3000K soft white colour temperature and a 40° beam spread for controlled light output.
Use for
Use for recessed cans, track lighting, display lighting, soffits, and outdoor-rated fixtures where a wet-location PAR20 lamp is required. It is dimmable and suitable for enclosed fixtures, which helps when retrofitting existing residential or light commercial lamp holders.
Avoid for
Avoid for fixtures requiring a different lamp shape, beam spread, voltage, or base type. Do not use where a non-dimmable circuit, incompatible dimmer, or non-120V supply would create performance issues.
Best for
Best for electricians and maintenance buyers replacing approximately 50W incandescent PAR20 lamps with a lower-wattage LED option while keeping a familiar beam pattern and E26 base format. A 40° beam is typically chosen for accent and directional lighting rather than wide general illumination.
Installed in
Typically installed in PAR20 track heads, recessed downlights, display fixtures, and exterior lamp holders rated for wet locations. Lamp size is approximately 2.99 in x 2.44 in (76 x 62 mm), which helps when checking fit in compact housings.
Why this product exists
This lamp provides an LED retrofit option for applications that need controlled directional light, dimming, and lower maintenance than incandescent lamps. It reduces energy use from a typical 50W incandescent equivalent to 6.5W while maintaining warm 3000K light. Actual dimming performance depends on the dimmer, fixture, and installation conditions.
Compared with similar products
Compared with wider-beam PAR lamps, this 40° version gives more focused light for highlighting surfaces and merchandise. Compared with non-dimmable lamps, it offers better control for residential and hospitality settings. Compared with newer replacement model S9406, this SKU remains a valid match where S29406 is specified.
Specifications
- Product type: LED PAR20 lamp
- Wattage: 6.5W
- Voltage: 120V
- Lumen output: 520 lm
- Colour temperature: 3000K, soft white
- CRI: 90+
- Beam angle: 40°
- Dimming: Yes, forward phase / reverse phase / phase selectable
- Base: Medium E26
- Incandescent equivalent: 50W
- Rated life: 25,000 hours
- Location rating: Wet location
- Fixture suitability: Enclosed fixture rated
- Operating temperature: -20°C to 45°C (-4°F to 113°F)
- Dimensions: 2.99 in MOL x 2.44 in MOD (76 x 62 mm)
- Compliance: cULus listed, Title 20, T24
- Warranty: 5 years
- BrandSatco Lighting
- Warranty5 year
- Lamps
- Lumens520
- DimmableDimmable
- Watts6.5W
- Color Temperature3000K
- Volts120V
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.