500 Lumens 7 Watts PAR20 LED Lamp 27K Eiko Lighting LED7WPAR20/FL/827-DIM-G9
What this product is for
This PAR20 LED lamp is used for directional flood lighting where controlled beam spread and warm colour temperature matter. It delivers 500 lumens, uses 7W, and fits standard E26 medium-base 120V lamp holders.
Use for
Use for track heads, recessed cans, display lighting, retail feature lighting, artwork, and residential accent lighting. The 40° flood beam is commonly chosen where you want a broader accent beam than a narrow flood.
Avoid for
Avoid where a non-dimmable lamp is specified, where a tighter spot or narrow flood beam is required, or where the fixture manufacturer does not permit this lamp type. Typical LED guidance from distributor and spec sources indicates it is not intended for enclosed fixtures or for use with some electronic timers, photocells, or occupancy sensors unless compatibility is confirmed. Actual performance depends on fixture design and control compatibility.
Best for
Best for electricians and maintenance buyers replacing approximately 50W incandescent PAR20 lamps with a lower-wattage LED option in warm-white applications. 2700K is typically selected for hospitality, residential, and display areas where a softer appearance is preferred.
Installed in
Installed in E26 medium-base fixtures on 120V circuits in homes, shops, galleries, restaurants, and light commercial interiors.
Why this product exists
This lamp provides a directional PAR20 beam with lower energy use than legacy incandescent PAR20 lamps while maintaining dimming capability and warm 2700K light for accent applications.
Compared with similar products
Compared with a PAR20 narrow flood, this 40° flood version spreads light over a wider area. Compared with higher colour temperatures such as 3000K or 4000K, 2700K gives a warmer appearance. As a rule of thumb, warmer PAR lamps are commonly used where ambience matters more than crisp task contrast.
Specifications
- Brand: Eiko
- Manufacturer part number: LED7WPAR20/FL/827-DIM-G9
- Lamp type: LED PAR20 flood lamp
- Light output: 500 lm
- Power: 7W
- Equivalent: approximately 50W incandescent replacement
- Colour temperature: 2700K warm white
- Beam angle: 40° flood
- Dimming: Yes
- CRI: 80+
- Voltage: 120V AC
- Base: E26 medium screw
- Operating temperature: -40°F to 104°F (-40°C to 40°C)
- Rated life: 25,000 hours typical
- Listings: ENERGY STAR rated; cULus Classified
- Environmental note: RoHS compliant; no mercury or lead
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.