500 Lumens 6.5 Watts GU10 LED 40K Satco Lighting S9384
What this product is for
This 120V GU10-base MR16 LED lamp is used for focused accent and directional lighting where a replaceable lamp is preferred. It delivers 500 lumens, 4000K cool white light, and a 40° flood beam for controlled illumination in compatible GU10 fixtures.
Use for
Use for track heads, directional ceiling fixtures, display lighting, retail highlighting, kitchen accent lighting, and other indoor damp-location applications where a line-voltage GU10 lamp is required. The 4000K colour temperature is commonly used where a cleaner, cooler white appearance is preferred.
Avoid for
Avoid for enclosed applications unless the fixture allows enclosed-rated lamps, and avoid fixtures requiring low-voltage MR16 lamps with pin bases instead of GU10 line-voltage lamps. Do not use where a wider beam is needed for broad area lighting.
Best for
Best for electricians and maintenance buyers replacing 50W halogen GU10 lamps with an LED option that keeps the same general lamp format, adds dimming capability, and reduces relamping frequency with a rated life of 25,000 hours.
Installed in
Typically installed in indoor track lighting, recessed directional fixtures, display fittings, and commercial or residential accent lighting points. Lamp size is approximately 2-3/16 in overall length (55 mm) and 1.97 in diameter (50 mm), matching standard MR16 proportions.
Why this product exists
This lamp provides a straightforward LED retrofit for GU10 halogen applications, cutting energy use from a typical 50W halogen to 6.5W while maintaining a focused beam. For accent lighting, a 40° beam is a common choice when you want more control than a wide flood but less punch than a narrow spot.
Compared with similar products
Compared with warmer 2700K or 3000K GU10 lamps, this 4000K version gives a cooler, more neutral-white appearance often selected for retail, task, and modern interior spaces. Compared with integrated LED heads, a replaceable GU10 lamp can simplify future maintenance because the lamp can be changed without replacing the full fixture.
Typical guidance only: beam effect, dimming behaviour, and perceived brightness depend on fixture design, mounting height, surface reflectance, and dimmer compatibility.
Specifications
- Brand: Satco Lighting
- Manufacturer part number: S9384
- Product type: LED GU10 MR16 lamp
- Wattage: 6.5W
- Voltage: 120V
- Lumen output: 500 lm
- Equivalent: 50W halogen
- Colour temperature: 4000K cool white
- CRI: 80+
- Beam angle: 40°
- Base: GU10
- Lamp shape: MR16
- Dimmable: Yes
- Dimming type: Forward phase, reverse phase, or phase selectable
- Rated life: 25,000 hours
- Location rating: Damp location
- Enclosed fixture rated: Yes
- Operating temperature: -25°C to +45°C (-13°F to +113°F)
- Overall length: 2-3/16 in (55 mm)
- Diameter: 1.97 in (50 mm)
- Warranty: 5 years
- BrandSatco Lighting
- Warranty5 year
- Lamps
- Lumens500
- DimmableDimmable
- Watts6.5W
- Color Temperature4000K
- Volts120V
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.