- Edmonton Stock: 529
:
from
to
Clear
Clear
500 Lumens 6.5 Watts GU10 LED 30K Satco Lighting S9383
SKU: S9383
Dimmable 120V LED MR16 lamp with GU10 base, 3000K warm white output, 520 lm light output, and a 40° beam for accent, display, and directional lighting. Commonly used as a 50W halogen replacement in track heads, recessed trims, and spot applications where GU10 line-voltage lamps are required.
Delivered to you by Aug 17 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This LED MR16 lamp is for line-voltage GU10 fixtures that need a compact directional lamp for accent, display, task, or spot lighting. It operates at 120V and is suited to residential and light commercial applications using GU10 twist-lock sockets.
Use for
Use for track lighting, recessed directional trims, display lighting, retail highlights, kitchen accent lighting, and other fixtures designed for MR16 GU10 lamps. The 40° beam is commonly used where you want a defined but not overly narrow spread.
Avoid for
Avoid using this lamp in fixtures that require low-voltage GU5.3 MR16 lamps, non-dimmable-only circuits where dimming behaviour matters, or enclosed applications unless the fixture manufacturer confirms compatibility. Always verify base type, voltage, and lamp dimensions before ordering.
Best for
Best for electricians and maintenance buyers replacing 50W halogen GU10 lamps with a lower-wattage LED option while keeping warm 3000K colour and a familiar MR16 form factor. Typical guidance: 3000K is commonly selected for hospitality, residential, and warm retail environments.
Installed in
Installed in GU10 track heads, ceiling spots, recessed gimbal trims, display fittings, and other 120V GU10 lamp holders. Maximum overall length is approximately 2-3/16 in (56 mm) with a diameter of 2 in (51 mm), so fit should be checked in tight trims and small heads.
Why this product exists
This lamp provides a straightforward LED replacement for halogen MR16 GU10 lamps, reducing wattage to 6.5W while maintaining directional light output, dimming capability, and a warm white appearance. It is intended to lower relamping frequency with an average rated life of 25,000 hours.
Compared with similar products
Compared with narrower beam lamps, the 40° spread gives a broader accent pattern for general highlighting. Compared with low-voltage MR16 lamps, this model runs directly on 120V and uses a GU10 base, which simplifies replacement in line-voltage fixtures. Rule of thumb: for accent lighting, beam angle selection affects light concentration more than wattage alone. Actual light distribution depends on mounting height, aiming angle, and fixture design.
Specifications
- Manufacturer part number: S9383
- Brand: Satco Lighting
- Lamp type: LED MR16
- Base: GU10
- Voltage: 120V
- Wattage: 6.5W
- Incandescent equivalent: 50W
- Initial lumens: 520 lm
- Colour temperature: 3000K
- Light colour: Warm white
- Beam angle: 40°
- CRI: 80
- Dimmable: Yes
- Average rated life: 25,000 hours
- Maximum overall length: 2-3/16 in (56 mm)
- Maximum overall diameter: 2 in (51 mm)
- Power factor: 0.96
- Certification notes: ENERGY STAR, RoHS compliant, UL or ETL listed
- Warranty: 3-year limited
- BrandSatco Lighting
- Warranty5 year
- Lamps
- Replaces50W
- Lumens500
- DimmableDimmable
- Watts6.5W
- Color Temperature3000K
- Volts120V
- CRI80
- ShapeGU10 MR16
- Beam Angle40°
- Diameter2"
- Overall Length2.19"
- BaseGU10
- Bulb FinishPrismatic Lens
- Rated Life25,000hrs
- Pack Size1
- Case Quantity12
- Energy StarYes
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 919
- Edmonton Stock: 812
- Edmonton Stock: 135
- Edmonton Stock: 201
