400 Lumens 4 Watts ST19 Vintage LED Bulb 22K Eiko Lighting LED4WST19/FIL/822-DIM-G7
What this product is for
This ST19 decorative LED filament lamp is used to create a warm vintage-style appearance while reducing wattage compared with a typical 40W incandescent lamp. It provides 400 lumens, a 2200K extra-warm light colour, dimming capability, and a medium E26 base for 120V fixtures.
Use for
Use for decorative pendants, wall sconces, open fixtures, hospitality lighting, restaurants, cafés, feature lighting, and residential spaces where the lamp itself is visible. It is commonly selected when a golden filament look and softer ambience are more important than high lumen output.
Avoid for
Avoid for enclosed applications unless the fixture manufacturer confirms compatibility, and avoid using it where a higher colour temperature or higher task-light output is required. It is not the right choice for utility lighting, workshops, or locations needing a neutral white appearance.
Best for
Best for decorative fixtures with exposed lamps, retrofit replacements for vintage-style incandescent bulbs, and dimmed ambient lighting in hospitality or residential settings. A typical buying consideration is appearance first, with energy savings and lower relamping frequency as secondary benefits.
Installed in
Installed in standard medium-base E26 lampholders on 120V circuits. Suitable for many decorative fixtures used in homes, restaurants, bars, reception areas, and boutique commercial interiors.
Why this product exists
This lamp exists for projects that need the look of an antique filament lamp without the energy use of a traditional incandescent. At 4W replacing approximately a 40W incandescent, it helps reduce connected load while maintaining a warm decorative effect. Actual dimming performance depends on the dimmer, fixture, and installation conditions.
Compared with similar products
Compared with standard A19 lamps, the ST19 shape is more decorative and is often chosen for exposed-lamp fixtures. Compared with 2700K decorative lamps, this 2200K version produces a warmer amber-toned appearance. Compared with non-dimmable decorative LEDs, this model is better suited where light levels need adjustment for ambience.
Specifications
- Brand: Eiko
- Manufacturer part number: LED4WST19/FIL/822-DIM-G7
- Order code: 09879
- Product family: LED Advantage Filament
- Lamp type: LED filament decorative lamp
- Bulb shape: ST19
- Light output: 400 lm
- Power: 4 W
- Incandescent equivalent: approximately 40 W typical replacement
- Colour temperature: 2200K
- CRI: 80
- Dimmable: Yes
- Beam spread: 320°
- Base: E26 medium screw
- Voltage: 120 VAC
- Finish / appearance: Golden vintage-style filament
- Average life: 15,000 hours
- Approximate dimensions: 5.9 in H x 3.0 in W (150 x 75 mm)
- UPC: 031293098795
Typical guidance: extra-warm 2200K lamps are commonly used for hospitality, decorative residential, and mood-lighting applications rather than task lighting. Actual performance depends on fixture design, dimmer compatibility, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.