470 Lumens 4.5 Watts G25 Vintage LED Bulb 27K Eiko LED4.5WG25/FIL/827-DIM-G7
What this product is for
This is a decorative G25 LED filament lamp for 120V screw-base fixtures that use an E26 medium base. It provides 470 lumens of warm 2700K light with a clear globe envelope and dimmable operation for residential and light commercial spaces.
Use for
Use for vanity lights, decorative pendants, wall sconces, open ceiling fixtures, hospitality spaces and retail fixtures where the lamp is visible. The 320° beam spread is suited to fixtures that benefit from broad all-around light rather than a directional beam.
Avoid for
Avoid for enclosed fixtures unless the fixture manufacturer and lamp listing specifically allow it. Also avoid where a higher lumen package, rough-service lamp, wet-location lamp or non-dimming circuit is required.
Best for
Best for decorative applications that need a vintage filament look with lower energy use than incandescent G25 lamps. Typical guidance: 2700K is commonly chosen for residential and hospitality settings where a warmer appearance is preferred.
Installed in
Installed in standard E26 medium-base lampholders on 120V circuits in bathrooms, bedrooms, corridors, restaurants, boutiques and similar indoor spaces. Globe size is approximately 3.1 in (80 mm) in diameter, which helps when matching vanity and decorative fixture proportions.
Why this product exists
This lamp is used where buyers want the look of a clear filament globe with dimming capability and reduced wattage draw. It is a practical replacement format for decorative incandescent globe lamps in visible fixtures.
Compared with similar products
Compared with standard A-shape lamps, a G25 globe is chosen more often for exposed decorative fixtures and vanities. Compared with non-filament LED lamps, this style is selected when lamp appearance matters as much as light output. As a rule of thumb, 470 lumens is suited to accent and decorative general lighting rather than high-output task lighting; actual light levels depend on fixture design, spacing and room finishes.
Specifications
- Brand: Eiko
- Manufacturer part number: LED4.5WG25/FIL/827-DIM-G7
- Order code: 09875
- Product family: LED Advantage Filament
- Lamp type: LED filament globe lamp
- Shape: G25
- Light output: 470 lm
- Power: 4.5 W
- Colour temperature: 2700K
- CRI: 80
- Dimming: Yes
- Base: E26 medium screw
- Voltage: 120 VAC
- Finish: Clear
- Beam angle: 320°
- Approximate diameter: 3.1 in (80 mm)
Estimated application guidance only. Actual performance depends on fixture design, dimmer compatibility, installation conditions and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.