250 Lumens 2.5 Watts T10 Vintage LED Bulb 27K Eiko Lighting LED2.5WT10/FIL/827-DIM-G7
What this product is for
This T10 LED filament lamp is for decorative indoor lighting where the lamp is visible and appearance matters. It provides 250 lumens of warm 2700K light from a clear vintage-style filament lamp with an E26 medium base for 120V fixtures.
Use for
Use in chandeliers, pendants, wall sconces, decorative vanity fixtures, restaurant lighting, hospitality spaces, and retail displays with exposed lamps. It is dimmable using TRIAC dimming and is commonly selected where a traditional incandescent look is wanted with lower wattage.
Avoid for
Avoid using this lamp in wet or enclosed locations unless the fixture specifically permits it. This model is listed for dry locations, so it is better suited to interior decorative fixtures than exterior or vapour-prone installations.
Best for
Best for decorative fixtures that need warm ambience, visible filament appearance, and broad light distribution. The 320° beam pattern is useful where the lamp is exposed and light is wanted around most of the lamp surface rather than in a narrow directional beam.
Installed in
Typically installed in 120V residential and light commercial fixtures with an E26 medium socket. Common applications include dining rooms, living areas, cafés, boutique retail, reception areas, and feature lighting in dry indoor spaces.
Why this product exists
This lamp gives contractors and buyers a decorative LED option that keeps the familiar T10 filament look while reducing lamp wattage compared with a typical 25W incandescent. It is useful when fixture appearance is part of the design intent and dimming is required.
Compared with similar products
Compared with standard frosted A-shape lamps, this T10 filament lamp is chosen more for appearance and exposed-fixture aesthetics. Compared with non-dimmable decorative LEDs, this model supports dimming for better scene control. As typical guidance, 250 lumens suits accent and decorative lighting more than primary room lighting. Actual light levels depend on fixture design, spacing, surface reflectance, and dimmer compatibility.
Specifications
- Brand: EiKO
- Manufacturer part number: LED2.5WT10/FIL/827-DIM-G7
- Order code: 09869
- Product family: LED Advantage Filament
- Lamp type: LED filament decorative lamp
- Bulb shape: T10
- Finish/style: Clear vintage filament
- Light output: 250 lm
- Wattage: 2.5W
- Efficacy: 100 lm/W
- Equivalent: approximately 25W incandescent
- Colour temperature: 2700K
- CRI: 80+
- Base: E26 medium screw
- Voltage: 120VAC
- Dimming: Yes, TRIAC dimmable
- Beam angle: 320°
- Rated life: 15,000 hours
- Location rating: Dry location
- Certification: UL listed
- Operating temperature: -4°F to 104°F (-20°C to 40°C)
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.