800 Lumens 8 Watts A19 Vintage LED Bulb 3K Votatec VO-FA19W8-120-30-D-M
What this product is for
This A19 LED filament lamp is used for general and decorative lighting in standard E26 screw-base fixtures on 120V circuits. The milky frosted finish helps soften the light output compared with clear filament lamps while still delivering a full 360° distribution.
Use for
Use in table lamps, pendants, wall sconces, ceiling fixtures, bedrooms, living areas, hospitality spaces, and other locations where warm 3000K light and an A19 lamp shape are required. It is also suitable where dimming is needed with compatible dimmers.
Avoid for
Avoid where a different base type, lower colour temperature, or higher lumen package is required. Confirm dimmer compatibility before installation, especially on retrofit jobs with older controls.
Best for
Best for electricians and maintenance buyers looking for a standard 60W incandescent replacement class lamp with lower energy use, warm white output, and reduced glare from a frosted or milky envelope.
Installed in
Typically installed in residential fixtures, light commercial decorative fixtures, hospitality applications, and enclosed or open luminaires that accept A19 E26 lamps. Lamp size is approximately 2-3/8 in x 4-1/4 in (60 x 108 mm).
Why this product exists
This lamp provides the familiar A19 form factor and warm ambient light of a traditional household bulb while reducing wattage to 8W. For buying guidance, 800 lumens is typically used as a replacement range for a 60W incandescent lamp, but actual light levels depend on fixture design, shade, mounting height, and room finishes.
Compared with similar products
Compared with clear filament lamps, the milky frosted finish gives a softer appearance and can help reduce direct glare. Compared with non-dimmable lamps, this model is intended for dimming with compatible controls. Compared with higher-CCT lamps such as 4000K or 5000K, 3000K is commonly chosen for warmer residential and hospitality spaces.
Specifications
- Brand: Votatec
- Manufacturer part number: VO-FA19W8-120-30-D-M
- Product type: A19 LED filament lamp
- Light output: 800 lm
- Wattage: 8W
- Input voltage: 120V
- Colour temperature: 3000K
- Base: E26 medium screw base
- Beam angle: 360°
- CRI: 80
- Power factor: 0.9
- Dimmable: Yes
- Rated life: 15,000 hours
- Lamp finish: Milky / frosted
- Shape: A19
- Dimensions: approximately 2-3/8 in x 4-1/4 in (60 x 108 mm)
- Typical application note: commonly used where a warm ambient lamp is needed for decorative or general lighting
Typical guidance only: actual performance depends on fixture compatibility, dimmer selection, installation conditions, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.