800 Lumens 7 Watts A19 Vintage LED Bulb 5K Votatec VO-FA19W7-120-50-D
What this product is for
This A19 LED filament lamp is used as a 120V screw-base replacement for general service lamps in decorative fixtures, open pendants, wall sconces, vanities, and other luminaires that use a standard E26 medium base. It provides 800 lumens of 5000K daylight output with a clear filament-style appearance.
Use for
Use for residential and light commercial fixtures where you want a classic filament look with LED energy savings. Common applications include kitchens, utility areas, retail displays, corridors, and work areas that benefit from a cooler 5000K colour temperature and 360° beam spread.
As a typical rule of thumb, an 800 lumen A19 lamp is commonly used as an LED replacement for a traditional 60W incandescent lamp. Actual light levels depend on fixture design, mounting height, spacing, and room finishes.
Avoid for
Avoid for applications requiring a directional beam, higher CRI than the listed >80, or specialty bases other than E26. Confirm dimmer compatibility before use on existing controls, especially on retrofit dimming circuits.
Best for
Best for electricians and contractors specifying a decorative A19 lamp with daylight output, dimming capability, and standard 120V line-voltage installation. It is also a practical choice where a clear bulb is visible in the fixture and appearance matters as much as output.
Installed in
Installed in E26 medium-base lampholders in 120V fixtures. Typical lamp size is 4-1/8 in x 2-3/8 in (approximately 105 x 60 mm), so verify clearance in shades, cages, and enclosed luminaires before ordering.
Why this product exists
This lamp gives buyers a familiar A19 shape and visible filament aesthetic while reducing wattage to 7W. It is intended for projects that need the look of a decorative incandescent lamp with lower energy use, longer rated life, and dimmable LED operation.
Compared with similar products
Compared with standard frosted A19 LED lamps, this filament version offers a more decorative clear-glass appearance and an all-around 360° beam. Compared with warmer 2700K to 3000K lamps, the 5000K version produces a cooler daylight effect that is commonly selected for task-oriented or utility spaces.
Specifications
- Brand: Votatec
- Manufacturer part number: VO-FA19W7-120-50-D
- Lamp type: LED filament A19
- Light output: 800 lm
- Power: 7W
- Equivalent: typical 60W incandescent replacement
- Voltage: 120V
- Colour temperature: 5000K daylight
- Base: E26 medium screw
- Beam angle: 360°
- CRI: >80
- Power factor: 0.9
- Dimmable: Yes
- Rated life: 15,000 hours
- Dimensions: 4-1/8 in x 2-3/8 in (approximately 105 x 60 mm)
- Certifications: cULus, ENERGY STAR, FCC, RoHS
- Warranty: 3 years
- Compatible dimmers listed by sellers: Leviton 6681, 6674, 6683; Lutron DVCL-153PLH, S600-P, DV600-P15, MACL-153M
Compatibility and performance can vary by fixture, dimmer, ambient temperature, and installation conditions.
- Volts120 V
- FinishClear
- BrandVotatec
- Warranty5 year
- Lamps
- Lumens800 Lumens
- DimmableYes
- Watts7W
- Color Temperature5000K
- Volts120V
- ShapeFilament
- Overall Length4-1/8" x 2-3/8"
- BaseE26
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.