800 Lumens 7 Watts A19 Vintage LED Bulb 4K Votatec VO-FA19W7-120-40-D
What this product is for
This A19 LED filament lamp is for standard 120V screw-base fixtures where you want the familiar look of a clear filament bulb with lower wattage draw. It provides 800 lumens of 4000K cool white light with a full 360° beam pattern for general illumination.
Use for
Use for table lamps, pendants, wall sconces, decorative fixtures, open fixtures, and enclosed fixtures that accept an E26 medium base lamp. It is commonly used in residential rooms, offices, retail areas, and light commercial spaces where a neutral-cool white appearance is preferred.
Avoid for
Avoid for fixtures requiring a different lamp shape, different base type, or non-dimmable-only control systems where dimming performance has not been verified. Also avoid applications needing wet-location lamps unless the fixture itself provides the required environmental protection.
Best for
Best for electricians and maintenance buyers replacing approximately 60W incandescent A19 lamps with a dimmable LED option that keeps the classic filament appearance. A 4000K lamp is typically chosen for kitchens, work areas, corridors, retail, and light commercial interiors where a cleaner white light is preferred over warm white.
Installed in
Installed in standard E26 lampholders on 120V circuits. Typical lamp size is 4-1/8 in H x 2-3/8 in dia. (105 x 60 mm), so it fits most fixtures designed for standard A19 lamps.
Why this product exists
This lamp gives buyers a straightforward LED retrofit for common A19 applications while maintaining the visual style of a clear filament bulb. At 7W for 800 lm, it reduces energy use compared with a traditional incandescent lamp while providing instant-on light and a rated life of 15,000 hours.
Compared with similar products
Compared with non-filament A19 LEDs, this lamp is selected more often where bulb appearance matters in visible fixtures. Compared with warmer 3000K versions, 4000K gives a cooler, more task-oriented light. As a rule of thumb, 800 lm is commonly treated as an approximate replacement for a 60W incandescent lamp, but actual perceived brightness depends on shade, fixture geometry, mounting height, and room finishes.
Actual performance depends on installation conditions, fixture design, dimmer selection, and local electrical code.
Specifications
- Brand: Votatec
- Manufacturer part number: VO-FA19W7-120-40-D
- Product type: A19 LED filament lamp
- Input voltage: 120V AC, 50/60 Hz
- Power: 7W
- Light output: 800 lm
- Colour temperature: 4000K cool white
- Base: E26 medium screw base
- Beam angle: 360°
- CRI: 80+
- Dimmable: Yes
- Rated life: 15,000 hours
- Power factor: 0.9 typical from distributor listings; manufacturer PDF shows greater than 0.7 for the family
- Lamp dimensions: 4.13 in H x 2.36 in dia. (105 x 60 mm)
- MOL / MOD from distributor listing: 4.125 in / 2.375 in (105 mm / 60 mm)
- Lens / bulb finish: Clear glass
- IP rating: IP20
- Operating temperature: approximately -20°C to 40°C (-4°F to 104°F); one manufacturer sheet section also shows -25°C to 40°C (-13°F to 104°F) for the family
- Certifications: cUL or cULus, Energy Star listed by distributor sources
- Warranty: 3 years
- Compatible dimmers listed by distributors: Leviton 6681, 6674, 6683; Lutron DVCL-153PLH, S600-P, DV600-P15, MACL-153M
- Volts120 V
- FinishClear
- BrandVotatec
- Warranty5 year
- Lamps
- Lumens800 Lumens
- DimmableYes
- Watts7W
- Color Temperature4000K
- Volts120V
- ShapeFilament
- Overall Length4-1/8" x 2-3/8"
- BaseE26
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.