800 Lumens 7 Watts A19 Vintage LED Bulb 3K Votatec VO-FA19W7-120-30-D
What this product is for
This A19 LED filament lamp is for decorative general lighting where you want the look of a traditional filament bulb with lower wattage and LED service life. It provides 800 lumens of warm 3000K light, runs on 120V, and fits standard medium screw E26 lampholders.
Use for
Use for table lamps, wall sconces, pendants, decorative ceiling fixtures, hospitality spaces, residential rooms, and light commercial areas using an E26 socket. The 360° beam angle is useful in open or clear-glass fixtures where side output matters.
Avoid for
Avoid for enclosed fixtures or applications where enclosure rating, rough service, or outdoor exposure is required unless the fixture manufacturer specifically permits this lamp. Also avoid using with incompatible dimmers.
Best for
Best for electricians and maintenance buyers replacing incandescent-style A19 lamps with a warm white dimmable LED option that keeps the visible filament appearance. Typical guidance: 3000K is commonly selected for residential, hospitality, and other warmer ambient spaces rather than cooler commercial task areas.
Installed in
Installed in standard E26 medium-base fixtures on 120V circuits. Lamp size is approximately 4-1/8 in x 2-3/8 in (105 x 60 mm), which suits typical A19 lamp envelopes where fixture clearance is standard.
Why this product exists
This lamp exists for projects that need decorative lamp appearance, full omnidirectional-style output, and LED energy savings in one replacement lamp. It is also useful where dimming is required and maintenance intervals matter, with a rated life of 15,000 hours.
Compared with similar products
Compared with standard frosted A19 LED lamps, this filament style is usually chosen for visible-lamp fixtures where appearance matters. Compared with incandescent A19 lamps, it uses 7W for 800 lumens, offering much lower energy use. Actual light levels and dimming performance depend on fixture design, controls, and installation conditions.
Specifications
- Brand: Votatec
- Manufacturer part number: VO-FA19W7-120-30-D
- Product type: LED filament lamp
- Lamp shape: A19
- Initial lumens: 800 lm
- Wattage: 7 W
- Input voltage: 120 V
- Colour temperature: 3000K warm white
- Base: E26 medium screw
- Dimmable: Yes
- Beam angle: 360°
- CRI: 80+
- Rated life: 15,000 hours
- Power factor: 0.9
- Dimensions: 4-1/8 in x 2-3/8 in (105 x 60 mm)
- Certifications: ENERGY STAR, cULus, FCC, RoHS
- Typical compatible dimmers listed by sellers: Leviton 6681, 6674, 6683; Lutron DVCL-153PLH, S600-P, DV600-P15, MACL-153M
- Volts120 V
- FinishClear
- BrandVotatec
- Warranty5 year
- Lamps
- Lumens800 Lumens
- DimmableYes
- Watts7W
- Color Temperature3000K
- Volts120V
- ShapeFilament
- Overall Length4-1/8" x 2-3/8"
- BaseE26
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.