350 Lumens 4.5 Watts LED Decorative Lamp 27K Medium Base E26 Eiko LED5WB11/E26/827-DIM-G8
What this product is for
This B11 decorative LED lamp is used to replace small incandescent chandelier lamps in fixtures with a medium E26 screw base. It provides 350 lumens of warm 2700K light from only 4.5W and is designed for dimmable operation on 120V circuits.
Use for
Use for chandeliers, wall sconces, decorative pendants, and other fixtures that take a B11 lamp with an E26 base. The 250° beam spread is well suited to open or partially open fixtures where broad light distribution is preferred over a narrow accent beam.
Avoid for
Avoid for enclosed fixtures unless the fixture manufacturer confirms lamp suitability. Also avoid where a different base type such as E12 candelabra is required, or where a higher lumen package is needed for task lighting.
Best for
Best for decorative residential and light commercial applications needing warm white dimmable light with the familiar B11 chandelier shape. Typical guidance: 2700K is commonly selected for dining rooms, living spaces, hospitality areas, and decorative ambient lighting.
Installed in
Installed in 120V fixtures with a medium E26 socket. Typical lamp size is approximately 1.4 in diameter x 3.9 in overall length (35 mm x 99 mm), which helps when replacing compact decorative incandescent lamps. Actual fit depends on fixture clearance and shade dimensions.
Why this product exists
This lamp gives contractors and maintenance buyers a lower-wattage LED replacement for decorative incandescent chandelier lamps while keeping a warm colour tone, dimming capability, and broad light output. It reduces relamping frequency compared with traditional incandescent options.
Compared with similar products
Compared with E12 chandelier lamps, this version uses a medium E26 base for fixtures built around standard North American sockets. Compared with non-dimmable decorative LEDs, this lamp is intended for dimming applications. Compared with narrow-beam decorative lamps, the 250° beam is better for general decorative illumination rather than accenting a small area.
Typical dimming performance depends on the control used. For best results, LED-compatible dimmers are commonly recommended. Actual performance depends on dimmer type, wiring, and installation conditions.
Specifications
- Manufacturer: EIKO
- Manufacturer part number: LED5WB11/E26/827-DIM-G8
- Order code: 10088
- Lamp type: LED decorative chandelier lamp
- Bulb shape: B11
- Base: E26 medium screw
- Input power: 4.5W
- Light output: 350 lm
- Colour temperature: 2700K
- CRI: 80+
- Dimmable: Yes
- Beam angle: 250°
- Voltage: 120VAC
- Approximate size: 3.9 in L x 1.4 in dia. (99 mm x 35 mm)
- Application: Decorative fixtures, chandeliers, sconces
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.