200 Lumens 2.5 Watts LED Decorative Lamp 27K Candelabra Base E12 Eiko LED2.5WB11E12/FIL/827-DIM-G7
What this product is for
This EiKO LED chandelier lamp is a decorative B11 filament LED bulb for 120V fixtures with an E12 candelabra base. It provides 200 lumens of warm 2700K light with a clear vintage-style filament appearance and a wide 320° beam spread for ambient lighting.
Use for
Use in chandeliers, wall sconces, decorative pendants, lanterns, vanity fixtures, and hospitality lighting that accept E12 candelabra-base lamps. It is suited to applications where warm ambient light, dimming capability, and a visible filament look are part of the fixture design.
Avoid for
Avoid where a higher lumen package is needed for task lighting, or where the fixture requires a different base, voltage, or lamp shape. Confirm dimmer compatibility before ordering for retrofit dimming applications.
Best for
Best for decorative fixtures where appearance matters as much as light output, including residential dining rooms, living spaces, restaurants, boutique hospitality spaces, and accent lighting. This lamp is also a practical retrofit where a traditional 25W incandescent chandelier lamp look is preferred with lower energy use.
Installed in
Typically installed in chandeliers, sconces, lantern-style fixtures, vanity lights, and other decorative luminaires using an E12 candelabra socket on 120VAC circuits. The lamp measures approximately 3.8 in (97 mm) long by 1.4 in (36 mm) wide, so fixture clearance should be checked before ordering.
Why this product exists
This lamp is designed for buyers who need the look of a vintage filament chandelier bulb with lower wattage and longer rated life than incandescent alternatives. At 2.5W and 200 lm, it is commonly selected for decorative ambient lighting rather than primary room illumination.
Typical lighting guidance: lamps in this output range are generally used for accent or decorative layers, not as the main source of light. Actual lighting results depend on fixture design, spacing, wall finishes, and dimmer settings.
Compared with similar products
Compared with higher-output B11 LED lamps, this 200 lm version is better suited to softer ambient light and decorative fixtures where glare control and vintage appearance matter more than brightness. Compared with incandescent chandelier lamps, it offers lower energy use, longer rated life, and dimmable LED operation while keeping a clear filament look.
Specifications
- Brand: EiKO
- Manufacturer part number: LED2.5WB11E12/FIL/827-DIM-G7
- Order code: 09858
- Product family: LED Advantage Filament
- Lamp type: LED decorative / chandelier lamp
- Bulb shape: B11
- Base: E12 candelabra screw
- Input voltage: 120VAC
- Wattage: 2.5W
- Light output: 200 lm
- Efficacy: approximately 80 lm/W
- Colour temperature: 2700K
- CRI: 80
- Dimmable: Yes
- Beam angle: 320°
- Finish: Clear
- Rated life: 15,000 hours
- Incandescent equivalent: commonly listed as 25W replacement
- Typical dimensions: 3.8 in (97 mm) length, 1.4 in (36 mm) diameter
- Typical applications: chandeliers, sconces, lanterns, vanity mirrors, accent and display lighting
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.