:
from
to
Clear
Clear
1020 lm LED track head · 12W 3000K 36° beam · round matte white H-style · Satco Lighting TH403
SKU: TH403
12W integrated LED H-style track head delivering 1020 lumens at 3000K with a 36° beam spread in a matte white round housing. Suitable for dry indoor accent and display lighting where a warm white, high-CRI directional head is needed.
What this product is for
The Satco Lighting TH403 is an indoor H-style track head with an integrated 12W LED module for directional accent, display, and task lighting. It provides 1020 lumens of warm 3000K light with a 36° beam angle for controlled aiming in residential and light commercial interiors.
Use for
- Highlighting artwork, shelving, and feature walls
- Retail displays, reception areas, and display runs
- Kitchen, corridor, and living-area track systems in dry indoor locations
- Retrofit or new H-style track layouts where a warm white beam is preferred
Avoid for
- Wet or damp locations
- Open-area flood lighting where a wider beam is required
- Non-compatible track systems; verify H-style track before ordering
Best for
Best for electricians and lighting buyers needing a compact round track head with high colour rendering, phase-cut dimming, and a medium 36° beam for accent lighting. A 36° beam is typically chosen when you want more spread than a narrow spot without washing too large an area. Actual light distribution depends on mounting height, aiming angle, and surface reflectance.
Installed in
Installed on 120V indoor H-style track in homes, boutiques, offices, galleries, and other dry finished spaces. The head extends approximately 6.25 in (159 mm) from the track and uses a die-cast aluminium body with a PMMA lens.
Why this product exists
This product provides a clean integrated LED alternative to older lamp-based track heads, reducing relamping while delivering warm white output, 90+ CRI colour quality, and dimming for controlled interior lighting scenes.
Compared with similar products
Compared with narrower 24° track heads, this 36° version gives a broader accent pattern that is commonly used where the target area is slightly wider or the mounting distance is shorter. Compared with lamp-holder style heads, the integrated LED design simplifies selection because lamp compatibility is not a buying factor.
Specifications
- Manufacturer part number: TH403
- Brand: Satco Lighting / NUVO
- Product type: LED track head
- Track compatibility: H-style track
- Wattage: 12W
- Voltage: 120V
- Lumen output: 1020 lm
- Colour temperature: 3000K, warm white
- CRI: 90+
- Beam angle: 36°
- Dimming: Yes, 120V phase-cut; reverse phase or phase selectable
- Finish: Matte white
- Shape: Round
- Material: Die-cast aluminium
- Lens material: PMMA
- Location rating: Dry location
- Operating temperature: -20°C to +40°C (-4°F to +104°F)
- Rated life: 30,000 hours
- Safety listing: cETLus listed
- Surge protection: Built-in 1 kV
- Approximate extension: 6.25 in (159 mm)
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 13
