- Edmonton Stock: 23
:
from
to
Clear
Clear
Surface Mounting Kit · 2 x 4 ft LED Flat Panels · Surface Ceiling Installation · Votatec SF24-A
SKU: SF24-A
Surface mounting kit for 2 x 4 ft LED flat panels where recessed T-bar installation is not available. Commonly used on drywall, concrete, or other finished ceilings in offices, schools, and retail spaces.
What this product is for
This surface mounting kit is used to install a 2 x 4 ft LED flat panel on a finished ceiling when a recessed T-bar grid is not available. It creates a framed surface-mount installation for compatible panel fixtures.
Use for
Use for commercial and institutional spaces such as offices, schools, corridors, retail areas, and similar indoor applications where a 2 x 4 ft (610 x 1219 mm) panel needs to be mounted below the ceiling surface.
Avoid for
Avoid using this kit with non-compatible panel sizes, outdoor locations, or applications requiring a recessed grid installation. Confirm panel compatibility before ordering, especially if mixing brands or panel series.
Best for
Best for retrofit work and finished ceilings where electricians need a clean surface-mounted panel installation without building a recessed ceiling system.
Installed in
Typically installed on drywall, concrete, or other flat finished ceilings in indoor commercial spaces. Surface-mount panel frames are commonly selected where ceiling access or plenum depth is limited.
Why this product exists
Not every site has a suspended T-bar ceiling. A surface mounting kit allows a standard 2 x 4 ft LED panel to be used in spaces with hard ceilings while maintaining a neat, low-profile appearance.
Compared with similar products
Compared with recessed mounting, a surface kit is used when there is no ceiling grid. Compared with suspended cable kits, it keeps the panel tight to the ceiling rather than hanging below it. For buyers, the key checks are panel size, frame compatibility, and whether the panel series supports a matching surface frame.
Specifications
- Product type: Surface mounting kit / surface frame for LED flat panel
- Compatible panel size: 2 x 4 ft (610 x 1219 mm)
- Application: Indoor surface ceiling installation
- Typical use: LED flat panels in commercial and institutional spaces
- Brand: Votatec
- Manufacturer part number: SF24-A
- Buying note: Votatec's panel documentation shows separate surface-mounted frame accessories for 2 x 4 ft panel formats; confirm exact series compatibility before purchase.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.