Linear Emergency LED Driver · 15W Max · 120-277V · Field-Installed Backup · NaturaLED BAEM15-48BC/MV-A
What this product is for
This field-installed emergency LED driver adds battery backup to compatible indoor LED fixtures so they continue operating during a power outage. It is intended for commercial, institutional, and similar indoor applications where emergency illumination is required.
Use for
Use for compatible linear, high-bay, canopy, parking garage, and other LED luminaires that accept a 15W emergency driver with 25-48 Vdc output. Commonly used in offices, retail areas, warehouses, corridors, and service spaces where a minimum 90-minute emergency lighting period is needed.
Avoid for
Avoid using this driver outdoors, in wet locations unless the host fixture is specifically designed and approved for that arrangement, or with fixtures that do not match the driver's output range and emergency-driver compatibility requirements. Do not assume 347V input compatibility for this model without project-specific verification.
Best for
Best for electricians and contractors needing a field-installed emergency backup solution for indoor LED fixtures on standard 120-277V branch circuits. It is a practical choice when retrofitting existing luminaires or adding emergency operation to selected new fixture installations.
Installed in
Typically installed inside or alongside a compatible luminaire body, wiring compartment, or approved enclosure, subject to fixture space and listing requirements. Driver housing measures approximately 11.0 in x 2.6 in x 1.8 in (280 x 65 x 45 mm) and weighs about 1.85 lb (0.84 kg).
Why this product exists
This product provides emergency egress lighting from standard LED fixtures without requiring a separate emergency unit in every space. For many projects, that helps maintain fixture appearance while meeting emergency lighting design intent. Typical emergency lighting practice is a 90-minute backup duration; actual performance depends on fixture load, installation conditions, battery condition, and local electrical code.
Compared with similar products
Compared with lower-output emergency drivers, this 15W model can support more light output in emergency mode when used with compatible fixtures. Compared with dedicated emergency units, a field-installed emergency driver can simplify the finished look by using the main luminaire as the emergency source. This model is non-dimming emergency backup equipment and should be matched to the host fixture's electrical requirements.
Specifications
- Brand: NaturaLED
- Manufacturer part number: BAEM15-48BC/MV-A
- Order code: 7334
- Product type: Emergency LED driver
- Installation: Field-installed
- Input voltage: 120-277 Vac, 50/60 Hz
- Input current: 100 mA max
- Output voltage: 25-48 Vdc
- Output current: 600 mA at 25 Vdc to 310 mA at 48 Vdc
- Output power: 15W max
- Charging time: minimum 24 hours
- Emergency discharge time: minimum 90 minutes
- Operating temperature: 32°F to 158°F (0°C to 70°C)
- Battery life: 500 cycles
- Application: Indoor
- Dimensions: 11.0 in x 2.6 in x 1.8 in (280 x 65 x 45 mm)
- Weight: 1.85 lb (0.84 kg)
- BrandNaturaLED
- Warranty5 year
- Light
- Max Lumen Output28445
- Lumen Output Min/Max25,001-30,000
- Watts Min/Max210W
- LED Color5000K
- Beam110°
- Power
- Volts120/347V
- Watts Range201-250W
- Dimming0-10V Dimming
- Dimensions
- Size and Shape2x2 Highbay
- Length22"
- Width16"
- Height2.5"
- Installation
- Recommended Mounting HeightApprox. 25'+
- Characteristics
- FinishWhite
- Rated Life50,000 Hrs
- Operating Temperature-30°C to 50°C / -22°F to 122°F
- StandardsDLC Premium
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.