Surface Mount Kit · 1x4 Panel · 4.5 in Depth · White · NaturaLED MT-1X4BOX-4.5IN
Surface mount kit for 1x4 LED back-lit panels and troffers where recessed installation is not practical. This white steel ceiling box is 4.5 in deep and sized approximately 48.0 x 12.2 x 4.5 in (1220 x 310 x 115 mm) for clean surface mounting in commercial and institutional spaces.
What this product is for
This 1x4 surface mount kit is used to install compatible LED flat panels or troffers directly to the ceiling when a recessed T-bar or drywall cavity installation is not available. It provides a finished enclosure for surface-mounted panel lighting in offices, schools, corridors, utility rooms, and similar indoor spaces.
Use for
Use for 1 x 4 ft LED back-lit panels and troffers that accept the NaturaLED MT-1X4BOX-4.5IN / P10334 accessory. Typical applications include retrofit work, concrete ceilings, finished ceilings with limited plenum access, and locations where a surface-mounted panel is preferred.
Avoid for
Avoid using this kit with non-compatible panel sizes, fixtures not approved for this mounting method, or outdoor / wet-location installations unless the luminaire and installation method are specifically rated for those conditions. Do not assume universal compatibility across all 1x4 panels.
Best for
Best for electricians and contractors needing a clean surface-mount solution for 1 x 4 ft panel lighting without building a custom box. The 4.5 in (115 mm) depth is useful where driver space or wiring room is needed above the panel.
Installed in
Commonly installed on indoor ceilings in commercial, institutional, and light residential spaces. Typical locations include offices, retail areas, classrooms, hallways, storage rooms, and finished basements.
Why this product exists
Surface mount kits solve installations where recessed panel mounting is not possible because of concrete structure, shallow ceiling cavities, or finished surfaces. As a rule of thumb, using a manufacturer-matched mounting kit can reduce fitment issues and speed up installation compared with adapting a generic frame. Actual fit depends on the fixture series, driver arrangement, and site conditions.
Compared with similar products
Compared with shallow surface kits, this 4.5 in (115 mm) version provides more internal space for wiring and compatible driver arrangements. It is intended for 1x4 fixtures only; 2x2 and 2x4 kits use different dimensions. For projects requiring a lower profile, a shallower manufacturer-approved kit may be a better choice if fixture compatibility is confirmed.
Specifications
- Brand: NaturaLED
- Manufacturer part number: MT-1X4BOX-4.5IN
- Order code: P10334
- Product type: Ceiling mount / surface mount kit
- Fixture size compatibility: 1 x 4 ft panel or troffer, compatible models only
- Depth / height: 4.5 in (115 mm)
- Length: approximately 48.0 in (1220 mm)
- Width: approximately 12.2 in (310 mm)
- Finish: White
- Application: Indoor ceiling surface mounting
Dimensions are based on manufacturer and distributor listings and may be rounded. Confirm fixture compatibility before ordering.
- BrandNaturaLED
- Warranty5 year
- Lighting Accessories
- Accessory Type1x4 Surface Kit
- Nominal Size1' x 4'
- FinishWhite
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
