Jack Chain · #12 Gauge · Bright Zinc-Plated Steel · NESCO JC12-50
What this product is for
This #12 jack chain is used to suspend lighting fixtures, signs and light-duty electrical hardware from structure or mounting points. It is supplied in bright zinc-plated steel for indoor use where corrosion resistance and a clean plated finish are required.
Use for
Use for hanging fluorescent or decorative fixtures, supporting fixture canopies and stems, and other light-duty suspension applications. It is commonly selected where a #12 trade size chain with an approximately 29 lb working load limit is required.
Avoid for
Avoid using this chain for overhead lifting, dynamic loads, life-safety support, or applications that exceed the stated working load. Avoid wet, corrosive or outdoor environments unless the installation conditions and code requirements allow a zinc-plated steel chain.
Best for
Best for electricians and maintenance teams needing a standard fixture-hanging chain for indoor commercial, institutional and residential lighting work. The 50 ft (15.2 m) box format suits service stock and small-to-medium installation jobs.
Installed in
Typically installed in indoor electrical rooms, corridors, utility spaces, workshops, retail areas and suspended fixture applications where chain support is permitted. Actual suitability depends on fixture weight, mounting method, local code and site conditions.
Why this product exists
This product provides a simple field-ready way to suspend fixtures when rigid stems or direct mounting are not practical. Bright zinc-plated steel helps reduce surface corrosion in normal indoor environments while keeping installation straightforward.
Compared with similar products
Compared with lighter chain, #12 jack chain is commonly chosen when a higher working load is needed for fixture support. Compared with stainless steel chain, zinc-plated steel is typically more economical for dry indoor locations. Always confirm the fixture weight, support method and code requirements before selection.
Specifications
- Product type: Jack chain
- Trade size: #12
- Material: Steel
- Finish: Bright zinc plated / galvanized
- Working load limit: 29 lb
- Packaging length: 50 ft (15.2 m)
- Link size across: 3/8 in (9.5 mm) approximately
- Typical application: Fixture hanging
- Product class: Lighting accessory / fixture chain and mounting
Typical guidance only: chain selection should match fixture weight, support hardware, installation method and local electrical code. Actual performance depends on installation conditions.
- Package Qty50 Feet
- BrandWhite Label
- Warranty5 year
- Lighting Accessories
- Accessory TypeMounting Chain
- Nominal SizeT12
- FinishZinc Plated Steel
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.