- Edmonton Stock: 1
:
from
to
Clear
Clear
Connector Cable · 3 ft (0.9 m) · For Linkable Wrap Fixtures · Votatec WRAP-3FT
SKU: WRAP-3FT
3 ft (0.9 m) connector cable for linking compatible Votatec wrap fixtures. Commonly used where fixture spacing or layout does not allow direct end-to-end connection; actual compatibility depends on the specific Votatec wrap series and connector style.
What this product is for
This accessory is a 3 ft (0.9 m) linking cable used to connect compatible Votatec linkable wrap fixtures. It is intended for indoor commercial and light industrial lighting layouts where fixtures need a short separation between housings.
Use for
- Connecting compatible Votatec linkable wrap lights with a short gap between fixtures
- Row lighting layouts in utility rooms, corridors, shops, storage areas, and similar indoor spaces
- Installations where a direct end-to-end connector is not practical
Avoid for
- Non-compatible wrap fixtures or other fixture families without matching connectors
- Outdoor or wet-location use unless the connected fixture system and installation method are specifically rated for it
- Applications where a power feed, plug cord, or suspension kit is required instead of a linking cable
Best for
Best for electricians and maintenance teams installing Votatec linkable wrap fixtures in continuous or spaced runs. A 3 ft cable is typically chosen when fixture placement must clear obstructions or align with structure while keeping a clean linked layout.
Installed in
Commonly installed in commercial, institutional, and light industrial interiors such as back-of-house areas, workshops, service corridors, storage rooms, and utility spaces.
Why this product exists
Some linkable wrap fixtures can be joined with accessory cables rather than only direct connectors. Votatec's wrap fixture literature indicates compatibility with 1 ft, 3 ft, and 6 ft small connection cables between fixtures, giving installers more flexibility in fixture spacing and layout.
Compared with similar products
Compared with a direct connector, a 3 ft (0.9 m) linking cable gives more installation flexibility where fixtures cannot sit tight together. Compared with a 1 ft cable, it allows more spacing; compared with a 6 ft cable, it is better suited to shorter controlled gaps with less excess cable to manage.
Typical guidance only: choose the shortest compatible linking cable that suits the layout to help keep runs neat and reduce unnecessary slack. Actual installation depends on fixture spacing, mounting method, and local electrical code.
Specifications
- Product type: Linkable wrap fixture connector cable
- Length: 3 ft (0.9 m)
- Brand: Votatec
- Part number: WRAP-3FT
- Application: Connection between compatible Votatec linkable wrap fixtures
- System compatibility: Votatec linkable wrap series using small connection cable accessories
- Installation environment: Indoor fixture linking accessory
- BrandVotatec
- Warranty5 year
- Lighting Accessories
- Accessory TypeWrap Connector
- Nominal Size3ft
- FinishWhite
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 33
- Edmonton Stock: 3
- Edmonton Stock: 18
